Farm Equipment - wet clutch wd 45

Print Page | Close Window

wet clutch wd 45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10172
Printed Date: 23 May 2025 at 8:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wet clutch wd 45

Posted By: bsb45chalm
Subject: wet clutch wd 45
Date Posted: 28 Mar 2010 at 6:02am

pressure plate thickness is .165 and other pressure plate is about .200 inches is that to thin ?

I'm putting it back together added 2 new clutch disc's , oher disc is ok thinking that I need to replace other driven disc and pressure plates. I would appreciate any in put on this subject!! thank you.

Replies:

Posted By: Don(MO)
Date Posted: 28 Mar 2010 at 8:18am

They will work if all the tractor is doing lite work, But if its going to go back to hard work like plowing I'd do it up right the first time in there. I know that it's more money now but you can burn the new parts out you did put in if it slips too much.

Don

-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.