7010
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=101518
Printed Date: 09 Sep 2025 at 6:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7010
Posted By: SHAMELESS
Subject: 7010
Date Posted: 05 Feb 2015 at 2:40pm
| how much operating pressure does a 7010 have? the tractor spec page doesn't show for 7000 thru 7080! I have the flow but not the pressure |
Replies:
Posted By: Joe(TX)
Date Posted: 05 Feb 2015 at 4:55pm
|
2500 psi max to the remotes and 3 point. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: tbran
Date Posted: 05 Feb 2015 at 5:54pm
| if you have flow and no pressure - where are you measuring? If at remotes, check the stand by - set to 450 or there abouts then pull the remote and adjust the high pressure on the compensator..... IF you turn it in or add a shim or two and it doesn't come up quickly - stop and post back - you may have rare but bigger issues... |
Posted By: tomNE
Date Posted: 05 Feb 2015 at 8:41pm
|
I had to add shims to one of my 7020's to bring it to 2500. readily available at agco dealer and wasn't tuff to do! ------------- AC from the start of my families farming career till the end! |
Posted By: SHAMELESS
Date Posted: 05 Feb 2015 at 8:41pm
| i'm trying to buy a machine and the manuf. says it has to have 2500-3000 operating pressure to work! thanks! there isn't anything wrong with the 7010! |
Posted By: MACK
Date Posted: 05 Feb 2015 at 9:45pm
| No problem with pump to pump 3000 psi, but lines and hoses could become a problem. MACK |
Posted By: SHAMELESS
Date Posted: 06 Feb 2015 at 4:00am
| lines and hoses on the tractor or the machine? or both? |
Posted By: AC200Puller
Date Posted: 06 Feb 2015 at 6:09am
| Both shameless ,I would try to get it set as close to 2500 as possible, saves future headaches . |
Posted By: darrel in ND
Date Posted: 06 Feb 2015 at 7:12am
Not another snow machine........? Darrel |
SHAMELESS wrote:Posted By: SHAMELESS
Date Posted: 06 Feb 2015 at 2:07pm
| Darrell...nope! |
Posted By: SHAMELESS
Date Posted: 06 Feb 2015 at 2:08pm
| thanks Mack and Puller...i'll mention this to the factory! |
Posted By: Joe(TX)
Date Posted: 06 Feb 2015 at 5:02pm
|
The pump only has pressure when there is resistance to build pressure. The pump only puts out low pressure until it is needed. To check pressure you will need to restrict the flow. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |