This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
I remember back in the day |
Post Reply |
Author | |
Don(MO)
Orange Level Joined: 12 Sep 2009 Location: Bates City MO. Points: 6862 |
Post Options
Thanks(0)
Posted: 07 Dec 2018 at 6:13am |
I remember back in the day we used to turn the front wheels around backwards to keep the mud from plugging the front end and helped keep the front of the tractor up in mud or snow, I was thinking we might be the only one's that did this.
Not the best shot of one but it's the only one I found. |
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
Sponsored Links | |
farmboy520
Orange Level Access Joined: 22 Jun 2016 Location: Beason, IL Points: 553 |
Post Options
Thanks(0)
|
I remember my dad telling me the same thing about turning the front wheels wider to keep from filling up with mud.
|
|
Roger (NE)
Bronze Level Joined: 14 Oct 2010 Location: Nebraska Points: 186 |
Post Options
Thanks(0)
|
Did that on a WD that we used on the feed Wagon back in the 70's. Worked well!
|
|
Lonn
Orange Level Joined: 16 Sep 2009 Location: Назарово,Russia Points: 29773 |
Post Options
Thanks(0)
|
I remember putting the canvas heat houser on Dad's WD. We thought that was great but when Dad hired the neighbor to blow out the driveway once with a 4430 and cab well, we never thought a Deere of any kind was great but the cab sure looked warm. Dad's WD had a narrow front with loader too but we never reversed the wheels. I remember one of my uncles did that though. Dad moved the loader to his D17 eventually where it still is today.
Edited by Lonn - 07 Dec 2018 at 6:55am |
|
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink I am a Russian Bot |
|
JoeM(GA)
Orange Level Joined: 12 Sep 2009 Location: Cumming,GA Points: 4521 |
Post Options
Thanks(0)
|
My WC has mud scrapers on the narrow front, did they not work, or was it an option?
|
|
Allis Express North Georgia
41 WC,48 UC Cane,7-G's, Ford 345C TLB |
|
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
I turned them around on Dad's tractor one winter, when I came home freom school, they were back they was they were, and boy was he mad!
|
|
Ted J
Orange Level Joined: 05 Jul 2010 Location: La Crosse, WI Points: 18699 |
Post Options
Thanks(0)
|
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
|
SteveMaskey(MO)
Orange Level Joined: 11 Sep 2009 Location: Wellsville, MO Points: 589 |
Post Options
Thanks(0)
|
We always turned them around on the tractor we fed with till Dad bought the 17 with the wide front
|
|
Bill Long
Orange Level Joined: 12 Sep 2009 Location: Bel Air, MD Points: 4556 |
Post Options
Thanks(0)
|
We always had a problem with narrow front tractors in deep snow. We took one wheel off. Not the best solution but helped. Good Luck! Bill Long |
|
CrestonM
Orange Level Joined: 08 Sep 2014 Location: Oklahoma Points: 8357 |
Post Options
Thanks(0)
|
Does the mud/snow just ball up in between the wheels and keep them from turning?
Lots of wide front tractors in our area.
|
|
SteveMaskey(MO)
Orange Level Joined: 11 Sep 2009 Location: Wellsville, MO Points: 589 |
Post Options
Thanks(0)
|
Yes Creston they will ball up on the narrow front tractors. Turn the wheels around and it helps a lot but if you don’t have power steering it steers harder. Also you want to hang on to the steering wheel as it will spin if you hit a hole just right. My Dad broke his wrist when a WD done this, the steering knob got him
|
|
caledonian
Silver Level Access Joined: 02 Apr 2016 Location: Nebraska Points: 469 |
Post Options
Thanks(0)
|
And heaven forbid if you let the mud freeze between the tires on a narrow front.
|
|
Ted J
Orange Level Joined: 05 Jul 2010 Location: La Crosse, WI Points: 18699 |
Post Options
Thanks(0)
|
|
|
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
|
Don(MO)
Orange Level Joined: 12 Sep 2009 Location: Bates City MO. Points: 6862 |
Post Options
Thanks(0)
|
We had that happen just one time, had to remove one wheel and break out the frozen mud, not a fun job with Dad watching us the next day cleaning the mess up after telling us boys to clean out the mud before it was parked the barn that night. To this day I will clean the wheels out in cold temp's. lmao
|
|
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
|
Gary Burnett
Orange Level Access Joined: 11 Sep 2009 Location: Virginia Points: 2851 |
Post Options
Thanks(0)
|
We parked the NF tractors in the Winter for the most part and used the WF tractors.
|
|
Stan IL&TN
Orange Level Joined: 13 Sep 2009 Location: Elvis Land Points: 6730 |
Post Options
Thanks(0)
|
As far as I know dad never turned it around and in fact I never knew it could be done. I learn something every day.🙂
|
|
1957 WD45 dad's first AC
1968 one-seventy 1956 F40 Ferguson |
|
Sugarmaker
Orange Level Joined: 12 Jul 2013 Location: Albion PA Points: 8167 |
Post Options
Thanks(0)
|
Don, Folks,
I never seen ours turned around on either of the narrow front end WD's in the family. Probably because a wide front was available most of the time when the ground was sticky or snowy. I do remember getting warned about the narrow front wheels catching, spinning the steering wheel and hurting you!
Regards, Chris |
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
caledonian
Silver Level Access Joined: 02 Apr 2016 Location: Nebraska Points: 469 |
Post Options
Thanks(0)
|
Yep
|
|
TOM (NE)
Bronze Level Joined: 11 Sep 2014 Location: Greenwod, NE Points: 92 |
Post Options
Thanks(0)
|
Back in the day, Dad did that with our WD during the winter for moving snow with the loader. I also remember once Dad front wheel froze solid with mud with the mounted cornpicker. He was not happy!
|
|
Dennis J OPKs
Silver Level Joined: 12 Sep 2009 Location: Overland Park, Points: 386 |
Post Options
Thanks(0)
|
It's been a long time but if I remember correctly you couldn't reverse them under a corn picker snout so if you packed that full of mud you had some real fun in taking the snout off to dig the mud out. We did reverse them on a manure loader tractor and that helped keep the wheels turning.
|
|
Brian Jasper co. Ia
Orange Level Joined: 11 Sep 2009 Location: Prairie City Ia Points: 10508 |
Post Options
Thanks(0)
|
Just got to be careful driving a NF in the pasture like that. One frozen meadow muffin can rip the wheel out of your hands
|
|
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford
|
|
Roger (NE)
Bronze Level Joined: 14 Oct 2010 Location: Nebraska Points: 186 |
Post Options
Thanks(0)
|
We first had scrapers on the WD we used on the mounted picker. That was also the tractor that had the number 3 mower on in the summer. And yes, if no power steering, you had to hang on if the front wheels were reversed. Fortunately the WD we used on the feed Wagon during the winter months was the one that was our cultivator tractor in the summer and we had installed Char-Lynn power steering on it.
|
|
HD6GTOM
Orange Level Joined: 30 Nov 2009 Location: MADISON CO IA Points: 6627 |
Post Options
Thanks(0)
|
I was too small to do that on dads WD45, but I do remember grandpa's C that way. I don't ever remember those wheels set in. I do know it was a real pain in the but to drive down the road. In 1959 we got the D17 with a new corn picker and a wide front to put on after the corn was picked. We were picking tall corn with that set up.
|
|
JayIN
Orange Level Joined: 18 Dec 2009 Location: SE/IN Points: 1982 |
Post Options
Thanks(0)
|
Maybe a little off topic.....but we learned the hard way to clean the manure spreaders out completely in cold weather. On pto spreaders you could break the drag chain. If we were hauling slop, we would have to get in with a crowbar and place some sticks underneath each slat to keep them from freezing down and breaking the chain.We had 800 head of cattle for a time and hauled pretty often. Oh, the memories!!!
Edited by JayIN - 09 Dec 2018 at 7:14pm |
|
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"
|
|
D17Milo
Bronze Level Joined: 11 Dec 2017 Location: Milo,Iowa Points: 65 |
Post Options
Thanks(0)
|
I remember Dad having a scraper on at least onr of his tractors. Shamless's comment about his Dad reminded me of the time I took the muffler off of Dad's 60 John Deere and put a straight pipe on it. VERY shortly afterwards I was told to take that blankety blank thing off and put the muffler back on. It didn't take long.
|
|
Brian F(IL)
Orange Level Access Joined: 14 Sep 2009 Location: Paxton, IL Points: 2690 |
Post Options
Thanks(0)
|
I've got scrapers on my narrow front WD-45. I'll have to get some pictures the next time I'm out in the shed.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |