This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Parts |
Post Reply |
Author | |
Chevy4x4
Bronze Level Joined: 28 Nov 2019 Location: Iowa Points: 8 |
Post Options
Thanks(0)
Posted: 01 Dec 2019 at 8:30pm |
Looking for sleeves & pistons for a G230 or G262 engine
|
|
Sponsored Links | |
dawntreader74
Orange Level Joined: 28 Oct 2013 Location: Manteno Points: 1758 |
Post Options
Thanks(0)
|
thank we used chevy- 250 or 292 pistons' you may haft to check it out for wrist pin size.
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 19472 |
Post Options
Thanks(0)
|
I'm a little confused, as usual. The pistons and sleeves are similar in design between the G-230 and G-262, but they sure aren't the same. If you put the wrong ones in a given short block, the stroke of the crankshaft is different between the two engines...………..
|
|
Chevy4x4
Bronze Level Joined: 28 Nov 2019 Location: Iowa Points: 8 |
Post Options
Thanks(0)
|
Iam talking Allis engines not Chevy. You can put 262 sleeve in a 230 Block
but you have to bore bottom of block .020 bigger. I am a Ex Allis mechanic on my own. For any one that wants to put a 8.3cummins in a 8000 series Allis all you have to do is get a 7140 IH flywheel and turn Allis rear plate around and re drill holes. put starter on battery side. and a few other things. I have done 3 so far one is going on 15 years ago no troubles makes a tractor out of them. Get a drive disc made and throw the # torque limiter as far as you can |
|
Chevy4x4
Bronze Level Joined: 28 Nov 2019 Location: Iowa Points: 8 |
Post Options
Thanks(0)
|
You can put 262 sleeves in a 230 block if you bore bottom 020 bigger. I really looking for 230 or 262 sleeve & pistons. I will make one or other work if I can find ether one. Some one had a post on here in Wisc. said he had some but I cant find it back. This forum is hard to navigate.
|
|
WF owner
Orange Level Joined: 12 May 2013 Location: Bombay NY Points: 4380 |
Post Options
Thanks(0)
|
Try searching for stuff in the forum by using Google. Go to Google.com and type in allis chalmers forum and then what you are looking for. I have had much better luck finding things that way.
|
|
Lon(MN)
Orange Level Joined: 11 Sep 2009 Location: Elk River,MN Points: 1903 |
Post Options
Thanks(0)
|
I have some 262 pistons and liners. lselkriver@gmail.com
|
|
Pfouts Family Farm
Bronze Level Joined: 05 Dec 2018 Location: Hiram, Ohio Points: 158 |
Post Options
Thanks(0)
|
I have new pistons and sleeves for G262 and know I have some NOS sleeves for G230. Not sure about NOS pistons for the G230, but I think there are some. I will try to take a look today. pfoutsfamilyfarm@gmail.com
|
|
Chevy4x4
Bronze Level Joined: 28 Nov 2019 Location: Iowa Points: 8 |
Post Options
Thanks(0)
|
Thank you guys for the comeback All I need is 4 of either set. I will buy how you guys want to sell them. I am trying to overhaul a AC fork lift with a G153 engine. The 230 is the same only a 6 Cly. Can you post how you want to sell. Rings are Available. Thanks again.
|
|
Chad (MN)
Orange Level Joined: 29 Oct 2009 Location: sc minnesota Points: 288 |
Post Options
Thanks(0)
|
I would sell you a non-running G230 engine from a Gleaner....SC Minnesota
|
|
220 3-190XT 2-D19d D19g 5-D17 UC 3-WC 2-WD 3-WD45 CA C H3 7-AllCrops 14-plows 3-Gleaners Lawnmowers SC-equipment
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |