This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
Another dang project,,,,,, |
Post Reply | Page <123> |
Author | ||
Thad in AR.
Orange Level Access Joined: 12 Sep 2009 Location: Arkansas Points: 9273 |
Post Options
Thanks(0)
|
|
You don’t reckon he still has a windmill sittin is somebody’s way do ya ??? He better not be yankin the rug out from under me on my Jeep. |
||
Sponsored Links | ||
Dnoym N. S. Can.
Orange Level Access Joined: 03 Oct 2009 Points: 544 |
Post Options
Thanks(0)
|
|
TEA-20 : Tractor made in England with a continental engine Z120, 120 CID, 25 PTO HP
TEA-2080 : Tractor made in England with a Standard engine that has 113 CID, 24 PTO HP, cylinder has 80 mm diameter (then 20-80) TEA-2085 : Tractor made in England with a Standard engine that has 127 CID, 28 PTO HP, cylinder has 85 mm diameter (then 20-85) TO-20 : Tractor made in Overseas, then TO; made in USA, with a continental engine Z120, 120 CID, 25 PTO HP TO-30 : Tractor made in Overseas, then TO; made in USA, with a continental engine Z129, 129 CID, 29 PTO HP All tractors above have 4 speed tranny TO-35 : Tractor made in Overseas, then TO; made in USA, with a continental engine Z134, 134 CID, 32 PTO HP, 6 speed tranny FE-35 : Tractor made in UK, with a continental engine Z134, 134 CID, 32 PTO HP, 6 speed tranny B:-) Dnoym
Edited by Dnoym N. S. Can. - 04 May 2019 at 6:51pm |
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
You don’t reckon he still has a windmill sittin is somebody’s way do ya,,?? Naw,,Thad,,,ole Les told me the brand new windmill he gave ole Shameless is still sittin under bout 3 feet of ,,,,,snow in IOWA,,!! SO,,,,the coast be clear whenever you wanna go do a quick road trip and load both them machines and skedadle while he's takin a nap
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Hey Dnoyn,,,many thanks for the info,,,I appreciate your time, Buddy. WoW,,,you mean my little ole TO20 gots a whopping 25 HP,,, HMMmmmmm,,,,,
|
||
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
|
my lawn mower has more HP than that!
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
UMmmmmm you gonna wanna do a friendly tractor pull,,,,????
|
||
chaskaduo
Orange Level Joined: 26 Nov 2016 Location: Twin Cities Points: 5203 |
Post Options
Thanks(0)
|
|
Joe right now it sounds like your TO has no horse power at all.
|
||
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
CHASK,,,,!!!!!!
|
||
darrel in ND
Orange Level Joined: 22 Nov 2009 Location: Hebron, ND Points: 8580 |
Post Options
Thanks(0)
|
|
Joe, I think that you cut ole Shameless deep. He hasn't got much good to say about your "deal of the month!" Darrel |
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Ya think so,,Darrel,,,??? I figured there ain't much that bothers that old guy,,,,he,,,,he,,,just ain't gonna pass up an opportunity to poke ole Joe,,,,, I check him out on Google Earth every so often and see him on the back porch and them filngs just flyin out,,,him sharpenin his poker'er stick,,,and,,,and,,you can't miss thet evil lookin grin on his face,,,,,,,
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Well,,I do gots a bit of an update,,,but I got to plead like ole Shameless SO I gots no pics as I just cannot seem to get the hang of my new IPhone to transfer pics to the PC for Chit,,!! Anyway,,,with some very good help from ole LeonR2013,,,i finally got all my chit together and got the donor patch welded in on the block where the #4 rod cap came out the block. I used the Nickel 55 rod and I'll tell youse Guys,,that is some great rod for cast iron as it flows like butter and adhears to the parent metal better than any other cast iron rod I've ever used,,,Many Thanks,,Leon,,,!!! I used up all but one rod out of a 1# tube and only had two little bitty seeps with the diesel test. I'm gonna gouge em out tamarrow and fill em up and redo the Diesel test and I'll bet they will not leak no more. I got a set of sleeves and pistons and will start the re-assembly when I get a question resolved, so here goes. When the #4 rod cap let go,,it also broke a small piece of the block at the very bottom of the #4 liner location. Right now there is only enough meat for ONE of the TWO sealing O-Rings on the liner. Ya'll thinkONE O-Ring would be enough?? I seriously don't think that could be fixed by welding but am thinking bout using some BELZONA or maybe even JB Weld and use the old liner as a "mold" and build the Belzona up to the block,,???? The broke piece is bout 1" wide X 1/2" high. Any thoughts on this,,??
|
||
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
|
maybe shoulda bought another engine outta a nuther tractor huh? like one I gots sitting out back with nuthin to do?
|
||
JohnCO
Orange Level Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992 |
Post Options
Thanks(0)
|
|
I don't think that Cheby engine will fit in a Fergi... |
||
"If at first you don't succeed, get a bigger hammer"
Allis Express participant |
||
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 21461 |
Post Options
Thanks(0)
|
|
DJ... email the pix from your i(diot)Phone to your PC.It's the ONLY way wife can get pictures...
|
||
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Shameless,!!!,,,,,Shameless,!!!!,,,,,,you been havin thet Massey engine all this time I been strugglin on finding one for parts,,,????????? For reals GOOD BUDDY,,,??? UMMmmmm,,,is it,,,,is it,,for sale,,,??? How soon can you deliver,,,,OOoopps,,I didn't mean exactly how that one came out,, Talk to me, me friend,,,,
|
||
chaskaduo
Orange Level Joined: 26 Nov 2016 Location: Twin Cities Points: 5203 |
Post Options
Thanks(0)
|
|
Shameless you play nice now.
|
||
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
||
chaskaduo
Orange Level Joined: 26 Nov 2016 Location: Twin Cities Points: 5203 |
Post Options
Thanks(0)
|
|
Just came across this TO 30 for parts, I can see the manifold and it should work.
In case you know who isn't gonna play nice.
|
||
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
||
LeonR2013
Orange Level Joined: 01 Jan 2013 Location: Fulton, Mo Points: 3500 |
Post Options
Thanks(0)
|
|
Joe, where's the piece that was knocked out of the block? Or was it lost when they pulled the pan?
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Hey Thanks Chask,,,but that right there is a Massey Harris which is prolly different than my Massey Ferguson. The engine in the pic looks different as well,,,Many thanks Tho,,, I gots a text in to the guy to make sure which engine that massey Harris has. Leon,,I did ask Ms Big Ones if she would ask her Granpa, if he kept the busted out piece but no luck,,,even offered her a nominal dollar amount for it,,,,,
|
||
tadams(OH)
Orange Level Access Joined: 17 Sep 2009 Location: Jeromesville, O Points: 9638 |
Post Options
Thanks(0)
|
|
Joe your phone and computer uses the same email so if you email the picture to yourself it will come back to the phone and computer.
|
||
chaskaduo
Orange Level Joined: 26 Nov 2016 Location: Twin Cities Points: 5203 |
Post Options
Thanks(0)
|
|
Sorry Joe, I don't know what the hey I was thinkin. It says Massey Harris right plain as day. I don't do dope so I must be a dope. But I'll still keep my not so eagle eye out for ya.
|
||
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Hey THANKS, Tom,,,I'll give it a try here in a little bit. No Preblems,,Chask,,It's whats in a man's heart that I concern myself with,,,,
|
||
JohnCO
Orange Level Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992 |
Post Options
Thanks(0)
|
|
A couple tires and rims and maybe a bit of paint and that MH would be a fine unit!
|
||
"If at first you don't succeed, get a bigger hammer"
Allis Express participant |
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
You bet John,,thas my motto,,,," They Can All Be Fixed,,,some just take a bit more time,,,,and dollars"
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
OK,,A bit of an update on the little Massey. I HAVE A GOOD BLOCK,,,,!!!!! Yep,,Yep,,,after a good amount of Nickel 55 weld rod, 13 grinder discs and some cussin and more cussing,,,,,I finally can say this block is ready for some re-assembly and put a spark in it,,,,,Yea,,!! I gouged out the three seep areas and rewelded and then had one other seep but finally can say there are NO Leaks from this area,,!! On the chunk of the block broke out of the very bottom of the liner area,,here's how I fixed it,,,and NO LAUGHING,,,,, I took the old liner, cleaned both O-Ring grooves and then ground the grooves a little bit deeper and wider. Mixed up some JB Weld and filled the grooves with this JB Weld,,,,,let it set up and chucked the liner in the lathe and machined the excess filler off the liner. Tamarrow, I'm gonna wrap some foil around the area where the O-Rings go, Very carefully set the liner in the block, then fill the broke out area with hi temp JB Weld,,alowing the foil / liner to be a "form" so to speak,,,,, With any luck,,the JB Weld should set on the foil / liner and provide "area" for the second O-Ring. Only'ist problem might be getting the liner back out if the foil doesn't provide a good "form"? What Ya'll think bout my shade tree repairs,,,,,??? Man's gotta do what a man's gotta do,,,,,,,,
Edited by desertjoe - 06 Jun 2019 at 8:19pm |
||
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
|
I thinks....you is eating to many muhlberries!
|
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Well,,,Shameless,,,as a fact of the matter,,,I HAVE been eating them Mulberrys this year as I read where any of the darker color fruit is the one that has most of the medicinal goody,,,,I know the ants, the flies and the Mocking birds can't all be wrong,,,,and,,,,and,,,if you can't beat em you just as well join em,,,,Chit,, my Momma didn't raise no fools,,,,,, They was just bout gone and the last storm we had,,, pretty much knocked most of em off the tree,,,,,, NOW for all the DANG clean up of back yard,,,,,,
|
||
JohnCO
Orange Level Joined: 11 Sep 2009 Location: Niwot Colo Points: 8992 |
Post Options
Thanks(0)
|
|
Somewhere I read about a guy who repaired the cylinders on his tractor with JB weld, I'm thinking it was an old JD. I just can't believe it would hold up long. Might work for you, Joe, you seem to have the touch.
|
||
"If at first you don't succeed, get a bigger hammer"
Allis Express participant |
||
desertjoe
Orange Level Access Joined: 23 Sep 2013 Location: New mexico Points: 13358 |
Post Options
Thanks(0)
|
|
Well,,,,Fellars,,,I lucked out,,,I DID,,!! The shade tree repairs I did to the Massey block in the area where the ORings for the liners go,,look to have been good,,,,,, I had a bit of an issue getting the liner out of the block this mornin,,,then the foil had stuck to the JB Weld and after some careful peeling off the foil,,,,Presto,,,!!! the JB looks to be part of the block with nary a visible defect,,cannot feel any line where the two metals join,, Since I'm now past this biggest hurdle,,I'm gonna start the re-assembly and see what this mofo sounds like,,,chit,,I still ain't fount me a manifold,,,maybe I'll send ole Les some money to go get the one on ole Shameless's TO35,,,'sides,,,, he ain't using it,,,, It's a relief,,now I know the block ain't junk,,at least for now,,,,
|
||
shameless dude
Orange Level Joined: 10 Apr 2017 Location: east NE Points: 13611 |
Post Options
Thanks(0)
|
|
shucks...if CAT can use JBweld on their heads, it should be good!
|
||
Post Reply | Page <123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |