| Author |
 Topic Search  Topic Options
|
DougG 
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8247
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 2005 Saturn Veu front brakes
Posted: 20 Apr 2019 at 1:29pm |
|
Got a 2005 Saturn Vue and having front brake issues , heres what happened, passenger side front brake caliper stuck one day so replaced the rubber brake line , it had a shimmy when applying the brakes after , and they were wore down so replaced the front brake pads and rotors on both sides, also replaced the wheel bearing assemble as it had a little play too,caliper / brake come on ,relubed the sliding pins ran good for a few weeks and done it again , put a new caliper on it , now it drives great but sometimes out of the blue its like the passenger side brake comes on with a grinding noise then stops after a bit, no ABS light comes on , im stummped !
|
 |
|
Sponsored Links
|
|
|
chaskaduo
Orange Level
Joined: 26 Nov 2016
Location: Twin Cities
Points: 5200
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2019 at 1:43pm |
|
I had a car do that before and ended up replacing the proportioning valve. Your mileage may vary.
|
|
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8247
|
Post Options
Thanks(0)
Quote Reply
Posted: 20 Apr 2019 at 4:28pm |
|
Its got 197000 on it so probably a good thing to replace, or its in the ABS controller thanks
Edited by DougG - 21 Apr 2019 at 7:00am
|
|
fixer1958
Orange Level
Joined: 13 Feb 2010
Location: kansas
Points: 2434
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2019 at 7:22am |
|
Does it sound like the ABS pump is coming on when you say a 'grinding noise'?
|
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009
Location: Greensville,Ont
Points: 24338
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2019 at 8:23am |
could be a slug of air in the other side brake line. It took me 6 tries to get AIR the air outta the forklift brakes and that only has 3' of tubing ! A slight bend was allowing the bubble to go back and forth... sigh.
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)
Never burn your bridges, unless you can walk on water
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8247
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2019 at 9:36am |
|
No noise from the ABS
|
|
Dakota Dave
Orange Level
Joined: 12 Sep 2009
Location: ND
Points: 3964
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Apr 2019 at 11:31am |
|
You changed the hoses and calipers did you use a tech 2 and bleed the brakes if not your ABS module probably has air in it. It wont cause the ABS light to come on but you wont get a good bleed without comanding bleed mode in the ABS
|
|
chaskaduo
Orange Level
Joined: 26 Nov 2016
Location: Twin Cities
Points: 5200
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Apr 2019 at 2:20pm |
Gotta love them A$$inine Brake Systems. 
|
|
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8247
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Apr 2019 at 4:37pm |
|
Didn't do nothing like that Dave just bleed them the way I do with others, gotta do some homework!
Edited by DougG - 23 Apr 2019 at 8:05am
|
|
