Allis Employee/Dealership Registry
Edit an Employee/Dealership
Minning and Forestry Equipment
Pumps and Turbines
Other Industrial Equipment
I joined Allis-Chalmers as a part of the Advanced Development Program. Under this program I had 5 60months assigments in different groups. I worked is Independence Mo at Gleaner Combines in the test laboratory. I worked on improving the cutting mechanism to improve ground speed for wheat harvesting. My design team tested prototypes of a split sickle bar and a resonant spring that reduced HP and vibration. Next I worked in West Allis in Compressor Division to develop simulation tools and curve fitting algorithm for compressor simulation. I then transfered to ATC and worked on Kiln design and other similation for AG Tractor Division. I then began work in Noise and Vibration department of ATC as my "real job". I worked on developing a tractor transmission analysis tool that used FFT spectrum to identify noise and virbration quality in the transmission production line. I worked on developing remote analysis of compressor and process equipment in the factory environment. in late 1981 i worked applying these principles to huge valve actuattor issues during manufacturing of vaves for the deep tunnel project. I really enjoyed the challenges and the talented people I worked with at Allis-Chalmers. I use the problem solving skills I learned in my current job as Chief Engineer at GE Healthcare
Enter information only about yourself or a deceased relative. This registry is experimental. If the quality and quantity of data collected is not sufficient, it may be discontinued. This information will be on display, but not sold or redistributed. Please do not provide too much personal information.
Use something easy to remember. Good examples are a mothers maiden name or the last four digits of a phone number.