Need help connecting an 80R mower to a WD45
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=212563
Printed Date: 20 Oct 2026 at 4:36pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need help connecting an 80R mower to a WD45
Posted By: JW in MO
Subject: Need help connecting an 80R mower to a WD45
Date Posted: 20 Oct 2026 at 3:15pm
|
Picked up an 80R mower this summer and am just getting around to trying to put it on the WD45. I thought it was pretty evident until I started to connect the unit under the tractor and it doesn't fit like I imagined. The bracket in the picture below, does not fit on the outside of the brackets on the tractor, but does fit inside. I can't imagine it just hangs on the drawbar pins, and the rod shown in the picture is too short to go all the way through the bracket on the tractor. I have about any manual on CA attachments but not much on the WD45. I take it the bracket faces back toward the mower like shown, but how does it mount up to the tractor?  ------------- Maximum use of available resources! |