HD6 Clutch Throwout Bearing Grease... Thing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=212252
Printed Date: 01 Nov 2026 at 1:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6 Clutch Throwout Bearing Grease... Thing
Posted By: Stevie
Subject: HD6 Clutch Throwout Bearing Grease... Thing
Date Posted: 16 Sep 2026 at 5:42am
|
Anyone experience replacing the grease line that runs from the throwout bearing to the steering clutch housing cover on an HD6? If you did, how did you do it? I've visited three places in the largest town within an hour of me and they all three did the hmm/giggle/chuckle for a few minutes before telling me they can't help. Both my lines are completely rotten, both ends either broken off or hanging by a sliver of metal. Parts information below: 045507 Hose, lubricating, throwout bearing   |
Replies:
Posted By: gemdozer
Date Posted: 16 Sep 2026 at 9:34am
| The first type was a line with a wick and recieved the oil from bevel gear case and the second type is a greace gun line instaled on the bigger inspection stering cluch cover |
Posted By: Coke-in-MN
Date Posted: 17 Sep 2026 at 3:12pm
|
A grease gun hose works as the threads are the same size or can be fit with a reducing fitting , 1/8 pipe thread , drilling a hole in cover of housing to bring hose or fitting to access point . ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |
Posted By: Stevie
Date Posted: 21 Sep 2026 at 5:27am
A local tractor shop speculated the pipe thread might be grease gun line; I hadn't gotten to trying to figure out how to test that theory. I've ordered some parts, we'll see how it goes.
|
Coke-in-MN wrote:Posted By: HD6 Merv
Date Posted: 21 Sep 2026 at 2:16pm
|
Everyone here who has dry backend HD6 ran a greaseline hose to the throwout bearing to ensure lubrication ------------- tits tyres and tracks they all cost you money |
Posted By: Coke-in-MN
Date Posted: 21 Sep 2026 at 10:16pm
|
Grease gun hose works , if you have the felt wick to ring gear case be sure to put plug in that hole . otherwise you will have oil in clutch housing if left open ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |