Farm Equipment - AC 7000 series Cab;

Print Page | Close Window

AC 7000 series Cab;

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=212090
Printed Date: 17 Sep 2026 at 2:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC 7000 series Cab;

Posted By: KJCHRIS
Subject: AC 7000 series Cab;
Date Posted: 26 Aug 2026 at 4:33am

Are the rubber isolators for mounting these cabs still available.?

Looking at a 7045 that will need all new for the rear, so would like to do front and rear if still available.

It's low hours on engine rebuild and this spring it had hydraulic and transmission work done at local AGCO Dlr.

I know that AGCO no longer has them for the 200 tractors, but no idea on 7000 or 8000.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,

Replies:

Posted By: Alvin M
Date Posted: 26 Aug 2026 at 4:43am

AGCO Part # 70577257 Rear And 70266515 Front

Posted By: KJCHRIS
Date Posted: 26 Aug 2026 at 7:53pm

Thank you for the reply.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,

Posted By: DrAllis
Date Posted: 26 Aug 2026 at 9:39pm

Whenever I did one of those jobs, I placed four isolators across the front channel (only three from Milwaukee) and two more at the rear channel (where there are currently none). The rear two I don't even bolt in place. Just fit them in the holes provided and they will sit there and not escape. The cab will feel different than it ever has with six small isolators under your feet.