7060 fuel filter help needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211940
Printed Date: 17 Sep 2026 at 5:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 fuel filter help needed
Posted By: nickia
Subject: 7060 fuel filter help needed
Date Posted: 09 Aug 2026 at 8:41pm
|
I have a 7040 with what I believe to be a 7060 motor because of the intercooler on it, never the less I had a Allis Chalmers fuel filter on it #74894407. I went to replace it with a new AGCO filter #74894407 same number length and drain on the bottom. Any ways the new filter the threads on the new filter are to big it just slides up over the threads. I dug through my filter cuboard and found another older filter same number and it threaded on fine. Up date to the story is the newer filters with the same number are to large to thread on to the nipple. If tried 3 different filters with one being crossed back to a wix with that number and even the wix is to big? Was there something different with the new AGCO numbers vers the old ones size wise? any other filter numbers out there people are running? Thank you
|
Replies:
Posted By: tbran
Date Posted: 09 Aug 2026 at 8:51pm
You sure it was not 74394407
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: nickia
Date Posted: 09 Aug 2026 at 9:04pm
|
well what im seeing is that the 7060 should have the 74028945 filter the filter number ive been trying 74894407 belongs on a 8000 series. i dont know why the 2 old filters with the 74894407 fit on but like i said they were old back in the Allis chalmers day vers AGCO
|
|