Construction and other equipment - Where to get bearings

Print Page | Close Window

Where to get bearings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=95160
Printed Date: 02 Jul 2025 at 2:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Where to get bearings

Posted By: pinball
Subject: Where to get bearings
Date Posted: 15 Sep 2014 at 12:39pm

i am working on an allis H4 Crawler steering clutch. I need the throw out bearing and the pilot bearing that goes inside the hub of the steering clutch also I need some new bolts for the rear sprockets. where is the best place to order them and the cost. thanks norm

Replies:

Posted By: Coke-in-MN
Date Posted: 15 Sep 2014 at 3:01pm

If you have part numbers or bearings have numbers - a bearing house or even NAPA can find them .
Other option is MINNPAR in Mpls MN as OEM supplier of HD4 parts and will have most things . Bolts a fastener house can help for the Grade 8 parts you need or again back ot MINPAR.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Gargoyle
Date Posted: 17 Sep 2014 at 8:40am

If you order from Minnpar, get ready to spend money.. They charge insane shipping rate ($10 for a simple o-ring) and tack on a $5 service fee for any order less than $50.

I'd recommend a local bearing house if possible.

Posted By: ivan
Date Posted: 25 Sep 2014 at 7:20am

We stock the bearings 989-3792721

Posted By: pinball
Date Posted: 25 Sep 2014 at 8:33am

Thanks for the replies . I have them now. norm