Farm Equipment

Print Page | Close Window

D 12

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=7614
Printed Date: 02 Aug 2025 at 5:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 12

Posted By: Ed
Subject: D 12
Date Posted: 04 Feb 2010 at 6:11am

Why wouldn't a D 12 III have a traction booster gauge on it? It has a factory

plate. Thanks!

Replies:

Posted By: GregLawlerMinn
Date Posted: 04 Feb 2010 at 8:52am

According to my service manual, some D10/D12s did not have a TB setup, especially those with the 3PTH and/or those with the engine mounted hyd pump.

Posted By: RMD
Date Posted: 04 Feb 2010 at 10:10am

I thought by Series III all D10/12 had the independent hydraulic pumps at the rear of the tractor and draft-sensitive hydraulics even with the 3-point hitch? The 3-point used some kind of torque bars for draft sensing.

Earlier versions of the 3-point with the engine mounted hydraulic pump were not draft-sensitive.

Posted By: firebrick43
Date Posted: 06 Feb 2010 at 1:01pm

Traction booster gauges were not the most dependable and many times removed. Some tractors came with the traction booster system, just not the gauges, especially the small ones. Their really not that useful anyway, you can feel/hear the tractor labor and set depth lever to were it works the best by feel. Reproduction gauges are non functioning as far as I know.

Posted By: norm [ind]
Date Posted: 06 Feb 2010 at 1:21pm

we carry working gauges 1-800-254-3116

Posted By: snowman(MI)
Date Posted: 06 Feb 2010 at 6:57pm

According to some sales literature I have on the D-10 / 12 Series III, on the high clearance (hi crop) versions, they did not have the traction booster.

Posted By: TerryMN
Date Posted: 06 Feb 2010 at 8:16pm

My standard D12 III has draft control but no traction booster gauge. It has the plate also. My D-10 III is the same.