HD5 pins bushings etc carco winch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=71678
Printed Date: 28 Jun 2025 at 2:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD5 pins bushings etc carco winch
Posted By: JC-WI
Subject: HD5 pins bushings etc carco winch
Date Posted: 11 Jun 2013 at 12:44pm
I have a little 7+ton HD5 dozer with winch
 Tracks are not the greatest... Heres a pic.
Must be the new style see thru bushings? LOL
 Think a simple pin and bushing turning would do it? LOL
Does anyone have:
1. dimensions for the links?
2. New pins and bushings .. if links are acceptable yet.
3. or some good rails? and possibly sprockets too?
Here is pic of worse side.
 Think this sprocket is cherry?
cut off/weld on or find nos ine piece sprockets?
Also Does anyone have a bit of info on a Carco winch E-24?
One lever has forward nuetral and reverse , does the other handle have a brake? My handle is not attached at the moment. ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Replies:
Posted By: gemdozer
Date Posted: 11 Jun 2013 at 2:47pm
| The HD5 new links tightness are 3.687" and what I can see you need pine,boushing and sprocket and for the whinch you should have a lever for the brake and second for reverse and forward |
Posted By: JC-WI
Date Posted: 11 Jun 2013 at 3:03pm
|
Gemdozer, I think I need 66 pins and bushings, 33 of them for sure.
Are whole or weld on sprockets available yet?
Maybe have to set up on a jig and weld up and grind down the teeth and then heat treat?
Tried http://www.crawlerheaven.com/tracklinks_chart.htm" rel="nofollow - http://www.crawlerheaven.com/tracklinks_chart.htm but this link doesn't work for me.  ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: Dozer
Date Posted: 11 Jun 2013 at 4:15pm
| There are parts on eBay located in Maryland. Weld on sprocket rings are available. There are 2 different sprocket splines. |
Posted By: Coke-in-MN
Date Posted: 11 Jun 2013 at 4:37pm
------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: ac_sd
Date Posted: 12 Jun 2013 at 4:47pm
| I've got 2 sets of good tracks and sprocket rims for HD-5B... Located in San Diego (long way from Wisconsin)..... |
Posted By: dadsdozerhd5b
Date Posted: 12 Jun 2013 at 5:19pm
|
the winch levers: one is for forward/reverse, the other lever is for engage/freewheel. there is not brake on these winches. cables usually freeze up and do not work properly. I have a used set of tracks, the pins and bushings need to be turned, inside wear more than outside wear. rails are decent, slightly rounded on the outside edges but still useable. I think berco still has the weld on sprockets but not sure. pm me if interested. located in pa, a good ride from Wisconsin. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |