hd21 craigslist
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=70379
Printed Date: 01 Jul 2025 at 7:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hd21 craigslist
Posted By: michale34
Subject: hd21 craigslist
Date Posted: 16 May 2013 at 11:22am
|
craigslist 3803057313 heres a hd 21 price seems steep to me.
|
Replies:
Posted By: DMiller
Date Posted: 16 May 2013 at 8:38pm
|
Kinda hard to look at it without a site address, the CL number doesn't go anywhere in particular.
|
Posted By: michale34
Date Posted: 17 May 2013 at 9:11am
|
sorry craigslist little rock ar
|
Posted By: James Coons
Date Posted: 17 May 2013 at 9:19am
Here's the link
http://littlerock.craigslist.org/grd/3803057313.html" rel="nofollow - http://littlerock.craigslist.org/grd/3803057313.html
It is very high I think, Missing Radiator, torched track. Maybe they'll come down on the price with some coaxing. If it helps save it I do have a good radiator, hood, and a few other odds and ends that will fit it.
|
Posted By: michale34
Date Posted: 17 May 2013 at 4:52pm
|
I think i heard some talk about this tractor a few years ago .I heard of a hd 21 that had a cutter blade on it that was in a patch of woods in that area that someone had shot holes in the radiator . the machine suposely had trouble with the final drive and was parked I dont know if this is the same machine or not but with the radaitor missing and a track cut it might be . or on the other hand scrappers my have taken the parts but the exhaust is covered and the air cleaner is on so i would think scrappers would just leave it uncovered.I might take a ride and look at it . its only about 80 miles from me.
|
Posted By: CAL(KS)
Date Posted: 17 May 2013 at 10:15pm
looks like an early model 55-58 Buda/Lanova with HD844 and mechanical blower similar to detroits before the use of turbos
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: JohnCO
Date Posted: 18 May 2013 at 12:07am
What do you think it was used for? Kind of unusual to have a winch and no blade. Can't see $8,500, maybe $3,500.
-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant
|
Posted By: CAL(KS)
Date Posted: 18 May 2013 at 6:27am
could have been used to pull scrapers with dual spool rear cable unit, or more likely blade was removed to tilt nose/remove radiator and sold/scrapped/lost. yes quite high for not running and no blade.
they are hard to load when they don't run. doesn't run = no hydraulic power = no steering
even pulling it around with a similar size machine is a challenge. have done this with HD16s
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
|