Construction and other equipment - H3 w/1081 Angle Dozer -Need Cutting Edge

Print Page | Close Window

H3 w/1081 Angle Dozer -Need Cutting Edge

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=65809
Printed Date: 27 Jun 2025 at 5:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H3 w/1081 Angle Dozer -Need Cutting Edge

Posted By: orangeman
Subject: H3 w/1081 Angle Dozer -Need Cutting Edge
Date Posted: 23 Feb 2013 at 5:03pm

Guys: Who sells cutting edge end sections and the blade cutting edge? My guess is that New Holland does not carry the cutting edge. Maybe I should check Caterpillar?

Anyone here replaced their cutting edge on the dozer blade for an H-3? Thank-you for any advice.

Orangeman

Replies:

Posted By: Ages Cat
Date Posted: 23 Feb 2013 at 10:33pm

I rebuilt my shuttle clutch and part were furnished by Illini Construction Parts, an advertiser on this site. The plugs for the steering clutch compartments are 55 gallon drum plugs. The track guards will have to be purchased from a wrecking yard or fabricated. all the instruments are D-15.

Posted By: orangeman
Date Posted: 24 Feb 2013 at 4:18am

Ages Cat: Thank -you for the info. That helps alot.

Appreciate it!

Orangeman

Posted By: Coke-in-MN
Date Posted: 24 Feb 2013 at 3:56pm

IF you put those bung plugs into the case - be sure to drill a few 1/4" or larger holes in them or the next thing will be you will ask what to do about waterlogged and rusted parts in that case.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: orangeman
Date Posted: 24 Feb 2013 at 4:43pm

Coke: Excellent idea, hope that mice can get into a 1/4 hole. Danged they really mess up the inside of a bull pinion housing. I got a heck of a laugh out of Dozer's post a while back about the tensile strength of mouse pee!!!