Farm Equipment - Packing Kit for 500 loader hydraulic cylinder?

Print Page | Close Window

Packing Kit for 500 loader hydraulic cylinder?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=63727
Printed Date: 06 May 2025 at 2:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Packing Kit for 500 loader hydraulic cylinder?

Posted By: Marshall
Subject: Packing Kit for 500 loader hydraulic cylinder?
Date Posted: 22 Jan 2013 at 7:42am

Does anybody know the part numbers of the packing or seal kit for the lower hydraulic cylinders on a 500 series loader? I have been searching online and I am not having very good luck finding anything without a manual. Any information would be greatly appreciated.

Replies:

Posted By: BRYAN H
Date Posted: 22 Jan 2013 at 7:46am

70584481

Posted By: DougG
Date Posted: 22 Jan 2013 at 10:35am

Wondering how much they are thru Agco, i need 4 sets!

Posted By: BRYAN H
Date Posted: 22 Jan 2013 at 12:36pm

$54.50 each

Posted By: DougG
Date Posted: 22 Jan 2013 at 2:41pm

Thanks , i was guessing itd be cheaper to buy a new loader

Posted By: Nathan (SD)
Date Posted: 23 Jan 2013 at 1:39am

http://www.baumhydraulics.com" rel="nofollow - www.baumhydraulics.com

Item no. 00G00083 $ 8.92 per cylinder

Posted By: DougG
Date Posted: 23 Jan 2013 at 3:50am

Thanks on that last tip i was gonna call around today on other places!

Posted By: jeickman01
Date Posted: 09 Dec 2017 at 7:26am

Thanks for the Baum connection. Placed my order this morning as well. While I couldn't find the packing kit part number in my old May 1965 parts catalog I did find that the individual seal part part numbers are the same for the lift and tilt cylinders.

Posted By: jeickman01
Date Posted: 09 Dec 2017 at 7:28am

oops. didn't realize this thread was so old.

Posted By: Bodnarboy
Date Posted: 18 May 2022 at 11:57am

Happy Wednesday everyone!!! I have been meaning to find part #'s for my AC500 loader to rebuild the cylinders. Just wanted to say that I read this post and decided to give BAUM Hydraulics a call. 3 min phone conversation and all 4 kits are being shipped today here to Maryland!! $25.92ea I believe is extremely fair.

Posted By: jriceman
Date Posted: 22 Oct 2022 at 9:26pm

New to the forum. And reading through this and the knowledge base has helped a lot. I was able to find components to rebuild my model 500 loader main lift cylinder on an AC170. The one main lift cylinder is leaking bad but the rod looks good. My guess is that seals are extremely old and cracked.

Does anyone know the best way to remove the nut retainer?

Posted By: DrAllis
Date Posted: 23 Oct 2022 at 7:52am

The best way is to use the official tool from Allis-Chalmers from back in the day. Every A-C dealership had one. Looks like a spanner wrench made to fit into the two slots.

Posted By: jriceman
Date Posted: 23 Oct 2022 at 8:22am

Thank you. I might make one as the other cylinders will probably need rebuilt in the near future. I’m debating on whether to do them all at once or not.