Print Page | Close Window

Need source for AC forklift starter?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=59298
Printed Date: 31 Oct 2024 at 6:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Need source for AC forklift starter?
Posted By: Broncobilly
Subject: Need source for AC forklift starter?
Date Posted: 02 Nov 2012 at 9:56pm
Anyone know of a source for a new or re-manufactured starter, for an Allis Chalmers FPB 20-24 (1 ton lift capacity) forklift?  The engine is a Waukesha FC 133 gas four cylinder, manual trans.  I believe it is an early 1970's model?  Some of the digits on the data plate are wore off, so I haven't emailed the AC historical site, to verify it's age.  I brought the starter to NAPA, and they couldn't locate a replacement.  I then ordered a starter online, from a small engine suply (said it would fit an FC 133).  Tried to mount the new starter today, and it doesn't fit!  The start I received from the supply house, has an external solenoid, which won't clear the trans bellhousing.  The original starter, has no external solenoid. 
The original starter has a MAK 4001 marking on it.  I found on Google; that this marking indicates it was manufactured by Autolite, and it appears to have been used on a 1938-1940 American Bantam automobile.  Again; the NAPA folks were clueless with this info.  Any help is appreciated!


-------------
TIA!,
Broncobilly



Replies:
Posted By: Coke-in-MN
Date Posted: 02 Nov 2012 at 11:06pm


-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."


Posted By: Ages Cat
Date Posted: 02 Nov 2012 at 11:12pm
Contact Herc U Lift Parts Department @763-479-2501. Maple Plain, MN. 


Posted By: Broncobilly
Date Posted: 02 Nov 2012 at 11:19pm
Ages Cat,
Thanks for that info, I will call them on Monday.  From the pic posted by Coke-in-MN, it appears that my oem starter is missing the spring on the starter shaft?


-------------
TIA!,
Broncobilly



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net