WD45 front hub question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=58282
Printed Date: 07 Sep 2025 at 10:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 front hub question
Posted By: Sterff
Subject: WD45 front hub question
Date Posted: 14 Oct 2012 at 4:33pm
I was wondering what the right way is to take apart the front hub on a WD45 WFE. Im assuming the hub nut is threaded but, I don't have a large enough wrench/socket. How is this done? Thanks |
Replies:
Posted By: Stan IL&TN
Date Posted: 14 Oct 2012 at 5:12pm
Pipe wrench, strap wrench, large adjustable wrench, C-clamp, pipe clamp. ------------- 1957 WD45 dad's first AC 1968 one-seventy 1956 F40 Ferguson |
Posted By: Allis-chalmers wd45
Date Posted: 14 Oct 2012 at 6:52pm
|
Pipe wrench. Take cover off , then take off the nut with the cotter pin then bearings slide out ------------- 1946 "C" 1956 "WD45" 1965 "D17" Series IV 1979 185 factory ROPS deutz allis 385 planter |
Posted By: CTuckerNWIL
Date Posted: 14 Oct 2012 at 8:51pm
buy a bigger wrench If the hub cap on the one pictured needs to be taken off, clamp the hex cap in a vice and put a couple wheel lugs in 2 holes and put a pry bar between the lugs.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Sterff
Date Posted: 15 Oct 2012 at 4:22pm
| Thanks guys. The one pictured is not mine, mine are still on the tractor. Ill have to see if I can borrow a chain/strap wrench. |