WD transmission clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=57130
Printed Date: 03 Nov 2025 at 7:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD transmission clutch
Posted By: crawdon
Subject: WD transmission clutch
Date Posted: 19 Sep 2012 at 1:50pm
|
When I release the foot clutch on my WD the transmission engages no matter if the hand clutch is forward or back. Never owned a wd, could any one suggest what the problem is? Thanks
|
Replies:
Posted By: KY
Date Posted: 19 Sep 2012 at 3:16pm
|
It is either warped, stuck, adjusted too tight, or eliminated. It could also be that the shift collar is not disengaging the clutch. It should make a distinctive snap sound when it is disengaged. Some antique tractor pullers eliminate it for weight. Just some ideas. pull the plate off from under the battery box and check it out. With the tractor off engage and disengage the hand clutch lever. The plates should seperate. Also watch the linkages to be sure they are working.
|
Posted By: Ted in NE-OH
Date Posted: 19 Sep 2012 at 3:39pm
There is always some drag and the tractor will want to creep. If a light touch of the brakes stops it , your ok., if not you have hand clutch problems.
-------------
CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914
|
Posted By: crawdon
Date Posted: 19 Sep 2012 at 4:30pm
Ted,
I did the brake thing and now it works maybe something was stuck. Thanks for the replys.
|
Posted By: bradley6874
Date Posted: 19 Sep 2012 at 8:12pm
PLEASE CHECK THE OIL
-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul
|
Posted By: j.w.freck
Date Posted: 19 Sep 2012 at 10:22pm
|
when you hae the cover off o the hand clutch,ck and se if all 6 pivot pins are still in place.1 pin missing will shut it down...
|
|