hd6g 1963 model wet clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55874
Printed Date: 15 May 2024 at 3:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hd6g 1963 model wet clutch
Posted By: ratchet
Subject: hd6g 1963 model wet clutch
Date Posted: 26 Aug 2012 at 6:16am
What oil does the wet clutch take ? regular hydralic fluid??? Thanks
-------------
1956 HD6G , 1958 HD6G , 1963 HD6G,massey harris 20,case 995,huber,jd 350 , 1956 onan generator,poppin jonny ,massey ferguson, internatinal backhoe, i work on anything and everything its an addiction!!
|
Replies:
Posted By: Mactractor
Date Posted: 26 Aug 2012 at 3:44pm
|
automatic trans fluid 10W. Any of the dexron grades will do. 9 quarts in them I think
|
Posted By: Dozer
Date Posted: 27 Aug 2012 at 6:18am
|
Are wet clutches only on HD6GB machines? Do wet steering clutches have stronger springs that require hydraulic power for the throwout bearing? If not can an earlier HD6 be converted to wet steering clutches and master clutch?
|
Posted By: Mactractor
Date Posted: 27 Aug 2012 at 9:33pm
Wet master clutch conversion should be no problem, but the wet steer clutch tractors had some slight differences in the rear housings. Years back, I tried to fit the fine spline bevel gear shaft and pinion shafts to my dry steer HD6 (with the coarse spline shafts). Wouldnt work because the shaft bearings had different outside diameter. The wet steer tractors had bigger bearing bores.
To make an HD6G wet steer, I thought of fitting the 6G frames and loader assembly onto an HD6EP. You would then have hydraulic steer and power shift trans. Be a very formidable little loader. Be no yellow equipment come anywhere near you.
|
|