It's on, but it hurt....
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=55109
Printed Date: 10 Sep 2025 at 7:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: It's on, but it hurt....
Posted By: AaronSEIA
Subject: It's on, but it hurt....
Date Posted: 11 Aug 2012 at 8:27pm
|
After fighting the cult lift, side bracket, drilling/tapping the front pedistal bolts, and a trip to Fastenal for the special bolts, I can say that my WC now has the cultivator on it. Took about an hour, 3 jacks and 2 trips to the original book to see how it went on. Now I need to figure out how to get it to Old Threshers. Really don't want to drive it, but if it won't go on my buddies tilt bed, I might have to. Need to do a LOT of loosening up, but it is on. AaronSEIA |
Replies:
Posted By: CTuckerNWIL
Date Posted: 11 Aug 2012 at 9:51pm
Organize a yearly tractor drive, get people to come to you and drive to the show 
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: DaveKamp
Date Posted: 12 Aug 2012 at 10:24am
|
If you drive the roughest road, it'll probably be loosened up by the time you get there... I'd invite a bunch of friends to join you, hook up a trailer or two, load it with coolers and gadgets to show, and have a parade to the show-grounds... then I'll be able to recognize you... |
Posted By: AaronSEIA
Date Posted: 12 Aug 2012 at 12:25pm
|
My back might not take the roughest road. Going to hit the linkages with a wrench and some emry cloth and loosen everything up right. Should have done it before I hooked up. Didn't do my cult lift any favors trying to move something rusted tight. It wasn't in the best of shape to start with. AaronSEIA |