hd 6g final drive
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=54101
Printed Date: 18 May 2024 at 11:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hd 6g final drive
Posted By: ratchet
Subject: hd 6g final drive
Date Posted: 24 Jul 2012 at 7:30am
| Does anyone have a picture of the puller used to get the outdrive bearing off of the shaft on the final drive? the one mounted to the truck frame outside the sproket. Thanks |
Replies:
Posted By: michale34
Date Posted: 24 Jul 2012 at 8:44am
| my dad use to cut the truck frame with a torch and knock the bearings out and reweld it back to the frame. |
Posted By: dadsdozerhd5b
Date Posted: 24 Jul 2012 at 4:41pm
i hope this helps. it is from a hd5 service manual burt they are the same bearing and housing. good luck ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Posted By: q4016lanz
Date Posted: 24 Jul 2012 at 9:49pm
|
The two bolts on the outside screw into the housing and the center bolt pushes it off We use a 10 ton hyd puler kit for all those jobs
John ------------- 15 allis chalmers tractors 9 lanz bulldog tractors 2 water cooled deutz 9 john deeres tractors 14 Aus made orange chamberlains I spent most of my money on old tractors I wasted the rest |