hd 6 g serial #
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=53834
Printed Date: 19 May 2024 at 5:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hd 6 g serial #
Posted By: ratchet
Subject: hd 6 g serial #
Date Posted: 19 Jul 2012 at 9:27am
I need assistance identifying a hd6g I just purchased. There is a plaquard on the dash that has hd6g-16378, and on the right rear of the machine stamped hd6g 1637 any help idemtifying this machine would be appreciated, also i have a hd6g 1956 model are the parts interchangable??
|
Replies:
Posted By: gemdozer
Date Posted: 19 Jul 2012 at 12:03pm
| Yes must parts are the same in the 2 machines |
Posted By: DMiller
Date Posted: 19 Jul 2012 at 1:13pm
| I suspect you dig a little harder at the rear and that '8' will come up, too close a number on both to not be the same. |
Posted By: ac_sd
Date Posted: 19 Jul 2012 at 4:36pm
| That "8" could be a worn off "G" also....... If it has a 344 engine its likely a 1637 s/n, if it has a 6000 engine its likely the higher s/n..... |
Posted By: ratchet
Date Posted: 20 Jul 2012 at 7:28am
| Its a 1963 model the higher serial # Thanks for all of the help! |
Posted By: gemdozer
Date Posted: 20 Jul 2012 at 11:50am
| The HD6G later serie the head motor is different and should have a crossbar betwen the 2 finder and the hydrlic hose are attache on and for changing the stering cluch you need to drain the hydrolic tank and removed the cylinder hoses and crossbar. |