Construction and other equipment - HD6G Main Clutch replace

Print Page | Close Window

HD6G Main Clutch replace

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=52054
Printed Date: 15 May 2024 at 10:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD6G Main Clutch replace

Posted By: Red logger
Subject: HD6G Main Clutch replace
Date Posted: 13 Jun 2012 at 7:05pm

I recently became the proud owner of a Hd6G track loader. After a day of standing on my head adjusting the clutch, I have come to the conclusion that it is to the limit of adjustment. Question is how do you remove the clutch? Do you have to take the engine

and clutch out as a unit? Or can the clutch and housing be unbolted and lifted out like a Cat? Any direction would be much appreciated.

Replies:

Posted By: Coke-in-MN
Date Posted: 13 Jun 2012 at 8:19pm

Should be able to service in the machine , remove drive shaft, remove bellhousing bolts and linkage and lift out then access to clutch unit should be obtained.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Red logger
Date Posted: 14 Jun 2012 at 9:30am

Thanks Coke in MN