Farm Equipment - 1222 Corn Head on R72??

Print Page | Close Window

1222 Corn Head on R72??

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=51439
Printed Date: 25 Aug 2025 at 8:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1222 Corn Head on R72??

Posted By: Mark D.
Subject: 1222 Corn Head on R72??
Date Posted: 01 Jun 2012 at 10:06pm

Finally got our corn head home for the narrow rows. It is a newer gleaner head and it doesnt sit right on our R72. The bottom of the throat doesnt line up with the bottom of the header throat. Is there some kind of adapter that we need? The dealer we bought it from didnt mention anything else we would need. Thanks!!

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Replies:

Posted By: soybreedingboy77
Date Posted: 01 Jun 2012 at 11:41pm

If your R72 does not have lateral tilt the. You can either modify the head to fit your combine or adapt the combine to fit the head. If you also have a grain head then I would recommend adapting the head. If you post the serial numbers of your machine and head I can get the part numbers for the adapter kits.

Posted By: Mark D.
Date Posted: 02 Jun 2012 at 4:55am

No, we do not have lateral tilt on the combine. I will work on getting those numbers on here sometime today. Thanks for the help!!

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Posted By: Mark D.
Date Posted: 02 Jun 2012 at 4:00pm

Here they are:

R7214013

1222RHMZ7630

Thanks for your help!!

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Posted By: Mark D.
Date Posted: 04 Jun 2012 at 8:52pm

Still waiting for your help "soybreedingboy77". Thanks!

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Posted By: Mark D.
Date Posted: 06 Jun 2012 at 4:38am

Bump

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Posted By: Bob D. (La)
Date Posted: 06 Jun 2012 at 5:18am

Mark D. Click on his name and send him a PM direct. Could be he's busy and hasn't been back on the site or forgot about it.

-------------
When you find yourself in a hole,PUT DOWN THE SHOVEL!!!

Posted By: SteveM C/IL
Date Posted: 06 Jun 2012 at 8:48am

also check over at thecombineforum.com

Posted By: Dale-OH
Date Posted: 06 Jun 2012 at 10:30am

Mark

You will need 2- 71379541 which are the blocks for the sides of the throat to close the gap, also have to un bolt the top plate and move it down to the bottom set of holes. If you have any questions you can call me at 800-996-2937.

Dale

Posted By: soybreedingboy77
Date Posted: 06 Jun 2012 at 7:00pm

My cousin from the dealership got back with me on the part numbers for your conversion.
To adapt the for head to fit on your combine you will need to
"Move header top truss to non-Smarttrac position using parts below.
(2) - 71379541 - Non-Smarttrac Guides
(1) - 71383723 - Shield/Filler
(1) - 71383719 - Stiffener
He said the price for the parts if they ordered them would be
around $450.00 plus freight to your location or picked in Watseka, IL