Farm Equipment - 7000 shift lever needed

Print Page | Close Window

7000 shift lever needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=51232
Printed Date: 23 Aug 2025 at 4:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7000 shift lever needed

Posted By: Hurst
Subject: 7000 shift lever needed
Date Posted: 28 May 2012 at 12:34pm

So I got the top cover on and found that the shift lever under the cover is broken. It is a clean brake a little bit away from the rounded part. I'll try to post pictures later. Does anyone have part number http://www.tractor-part.com/search.aspx?+KNOBS&q=LEVERS+A+ALLIS+CHALMERS+70262260&l=IA" rel="nofollow -

Thanks

Hurst

-------------
1979 Allis Chalmers 7000
5800 Hours

Replies:

Posted By: Amos
Date Posted: 28 May 2012 at 8:46pm

I have welded other shift levers back together after they were broken and when we were moving their location or changing the location of the transmission. I always used just mild steel wire in the mig to weld them up. Did my 6060 after a calf went through between the seat and the steering wheel about 25 years ago and never have had trouble with it since, the shift lever I mean, not the steer...

Posted By: dscott
Date Posted: 28 May 2012 at 9:21pm

I think welding with just the 7018 would be my choice. 6011 is a deep penatration rod and may give you trouble with burn threw. About the only times I use 6011 is if I'm welding something that doesn't or cann't be cleaned very well. Also I have found you can settle the arc of 6011 down some by dipping your rod in water for a few seconds.