Print Page | Close Window

Woods Mower on a C

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49994
Printed Date: 21 Aug 2025 at 2:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Woods Mower on a C
Posted By: Rick ONU
Subject: Woods Mower on a C
Date Posted: 03 May 2012 at 7:21am
I recently purchased a C with an L306 Woods belly mower.  When the mower is lifted with the hydraulic cylinder, the bracket on the right hand side continues to run into the starter (so much so that it cut through the battery cable and shorted it out).  It is clear that the guy that had this tractor before me had the same problem because there is evidence of contact by the mower bracket on the starter.  Has anyone had this issue before?  Is there any particular way to keep these two things out of contact other than simply not raising the mower up all the way?  Thanks.



Replies:
Posted By: AJ
Date Posted: 03 May 2012 at 8:11am
I have a similar issue with my C that has 72" arts-way on it. I made a bracket that the mower hangs on when I'm not using the mower to support the deck. But it almost sounds as if your ARM on ur bracket is too long. Hard to say without seeing it though.

-------------
Can't fix stupid



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net