Farm Equipment - D19 rear work light

Print Page | Close Window

D19 rear work light

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49933
Printed Date: 22 Aug 2025 at 12:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D19 rear work light

Posted By: m16ty
Subject: D19 rear work light
Date Posted: 01 May 2012 at 11:20pm

I've been working on getting my lights working on my D19. All the headlights needed was a few wires repaired but the rear work light was missing. The problem is I don't know where the proper mounting place is. I first thought maybe it mounted on the fender but there is no hole there where it would mount. I looked at the wiring in the AGCO parts book but it doesn't give much detail other than it defiantly doesn't mount on the fender.

Replies:

Posted By: JoeO(CMO)
Date Posted: 02 May 2012 at 4:52am

at one time there was a bracket the bolted on top of the hydraulic valve stack and allowed for full adjustment of the light

-------------

Posted By: David(Stockbridge)MI
Date Posted: 02 May 2012 at 5:23am

Joe is correct. Have the lights in stock new, and have a mounting bracket also. David

http://www.djstractorparts.com" rel="nofollow - www.djstractorparts.com

-------------
All "NEW" Web Site http://www.djstractorparts.com

2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler