Snap Coupler Drawbar Part ID
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49900
Printed Date: 21 Aug 2025 at 2:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snap Coupler Drawbar Part ID
Posted By: GreenOrange
Subject: Snap Coupler Drawbar Part ID
Date Posted: 01 May 2012 at 3:21pm
I've had this part for a while now, and obviously there are some pieces
missing. I may have a project for it, but want to be sure about what it
is first. Anyone know for sure? I was thinking part of a
snap-coupler/three point adapter, but it's different from those I'm
familiar with. Any help appreciated!  |
Replies:
Posted By: Wil M (NEIA)
Date Posted: 01 May 2012 at 4:47pm
|
As far as I know, you are not missing any pieces. I have one exactly like it. From what I have been told it is a snap coupler to 3 point adaptor for a 3 point semi mount plow. Here is a picture of my adaptors. The one I have just like this is the back one. I do not have a spot for the third arm on mine like yours does.  ------------- "Yet there are soulless men whose hand and brain tear down what time will never give again." Anderson M Scruggs |
Posted By: baverwolf
Date Posted: 02 May 2012 at 12:50am
|
Hello! I've been looking to buy one of those but haven't had any luck so I might end up building one. Would either of you men be interested in taking some measurements for me? Ben
|
Posted By: GreenOrange
Date Posted: 02 May 2012 at 7:02pm
| Thanks for the info! I was only familiar with the type in the foreground of your picture. Glad to hear there isn't anything missing. It sure is built heavy! |
Posted By: CTuckerNWIL
Date Posted: 02 May 2012 at 7:17pm
|
John, I believe what you have is a Snap Couple hitch off of some heavy piece of equipment that someone weld a top link bracket to. I have the same hitch as Wil shows in back. I measured mine to try and attach it to a 3 point bush hog but it is too wide and would need something added to work on a 3 point implement. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: MBwcIll
Date Posted: 02 May 2012 at 8:54pm
| We bought a rear mounted row crop cultivator to put on our 19 with SC. It came with the hitch adapter shown above. When we traded for the 190, we took off the SC adapter to use the cultivator on the three point 190. In fact it is the just about the only item bought new, in the day, we still have. |