Construction and other equipment - 615 backhoe hydraulic pump needed

Print Page | Close Window

615 backhoe hydraulic pump needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49845
Printed Date: 12 Jun 2024 at 1:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 615 backhoe hydraulic pump needed

Posted By: tonysac
Subject: 615 backhoe hydraulic pump needed
Date Posted: 30 Apr 2012 at 6:07pm

Hello ,I'm looking for a front pump that runs off the front pulley,mine is weak and I would like to replace it. I checked around and Minn Par wants $1200.00 and a hydraulic shop wants a little more. Does any body know of a more reasonable supplier please?Somebody must make a similar pump cheaper, it has hoses on it so port location isn't that critical.Thank You

Replies:

Posted By: Dave A
Date Posted: 30 Apr 2012 at 6:42pm

what brand is it. Some of the pumps you still can get parts for.

-------------
Play the game for more than you can afford to lose... only then will you learn the game.
Winston Churchill

Posted By: orangeman
Date Posted: 30 Apr 2012 at 7:32pm

Recommend you research the pump first by getting a pump service manual. Then check with a hydraulic speciality shop. Check around a major airport, usually plenty of hydraulic shops found around there. $1200 seems very high for a fifteen gallon per minute pump.

Good luck - Orangeman

Posted By: DMiller
Date Posted: 01 May 2012 at 6:29am

Steel prices are extreme, so are machine shop rates at least around here that to cover for any raises unforseen as to materials cost. I priced just some structural metal for a small project, thought the guy at the yard was nuts so went shopping, at $320/ton for scrap it is not hard to justify the prices for finished goods steel or aluminum.

Posted By: acer
Date Posted: 01 May 2012 at 8:25am

look on the flange for pump id number. if you find it go to hydraulicpumpstore.com and get a quote. they matched my pump no for i-600 backhoe and sold me a new pump for $720.
it was exactly the same pump. hope this helps. also try hydraulic.net,LLC

Posted By: tonysac
Date Posted: 01 May 2012 at 9:26am

I did send it to a hydraulic shop and they also told me $1280.00. I believe its a webster pump and minn-par says no parts are available. It is a double pump ,one runs the loader and backhoe main circuit and the other runs the swing of boom.Where was the supplier of the pump for the I 600 located?

Posted By: Dave A
Date Posted: 01 May 2012 at 5:26pm

Bought parts for my Webster from Hydraulic .net. Look for a old Minn Moline tractor or a Oliver combine Believe they us the same pump.

-------------
Play the game for more than you can afford to lose... only then will you learn the game.
Winston Churchill

Posted By: Calvin Schmidt
Date Posted: 03 May 2012 at 6:02am

The early A-C hoes used a lot of Cessna hydraulics . My hydraulics guy took a look at the hydraulic pump on my 220 last week and commented that it looked like a Cessna. A-C used Webster small hyd pumps. My hydraulics guy also got me an exact match hydraulic pump for a JCB telahandler for under $500 when the dealer wanted over $1600.

-------------
Nothing is impossible if it is properly financed

Posted By: tonysac
Date Posted: 14 May 2012 at 11:35am

Well,ordered a pump from hydraulicpumpstore.com and it fit perfect ,haven't tried it yet but was also the best price i could find,$720.00.so i can bring it back to life.now i got to adjust shuttle clutch,slips under load in forward.Thanks for all help!