Equipment Jacks
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49352
Printed Date: 23 Aug 2025 at 1:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Equipment Jacks
Posted By: john(MI)
Subject: Equipment Jacks
Date Posted: 21 Apr 2012 at 2:20pm
|
A while back someone posted about the AC jacks that were used for on equipment. They looked like an old bumper jack. Does anyone remember the topic? I searched 'jacks" and didn't come up with anything. I picked up a couple at auction and I wanted to compare them to the pics from that post. The base and ratchet part on these ones are orange, there are two bolts in the lifting face, and no markings of any kind anywhere on them that I could find. ------------- D14, D17, 5020, 612H, CASE 446 |
Replies:
Posted By: Tracy Martin TN
Date Posted: 21 Apr 2012 at 3:29pm
|
John, Those would be the AC equipment jacks. The face will have a piece welded to it, with two tapped holes.Should be a hole to pin the base on, and one to pin jack up in transport mode. I would be interested in them if they are for sale. Thanks Tracy Martin ------------- No greater gift than healthy grandkids! |
Posted By: captaindana
Date Posted: 21 Apr 2012 at 4:53pm
| I believe my 500 series 4 row corn planter has one of those AC bumper jacks. I guessed they just bought them from some car mfgr.? |
Posted By: CTuckerNWIL
Date Posted: 21 Apr 2012 at 5:10pm
|
Here is the post but I don't see a picture anymore. http://www.allischalmers.com/forum/forum_posts.asp?TID=39803&KW=equipment+jacks&PID=302255&title=ac-jacks#302255" rel="nofollow - http://www.allischalmers.com/forum/forum_posts.asp?TID=39803&KW=equipment+jacks&PID=302255&title=ac-jacks#302255 ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Chad(WI)
Date Posted: 21 Apr 2012 at 5:32pm
|
Posted By: john(MI)
Date Posted: 22 Apr 2012 at 10:46am
Here is a pic of the jacks. They are for sale but I have no idea what they are worth. The lift bars are rusted, but I believe they would clean up fine with a little wire brushing. The jacks are a little loose, side to side, but again with a little metal work, I'm sure they could be steadied. The bases are dirty, I cleaned one off and the paint is intact. Anyone interested? ------------- D14, D17, 5020, 612H, CASE 446 |