Farm Equipment - 6080 draw bar

Print Page | Close Window

6080 draw bar

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=49350
Printed Date: 24 Aug 2025 at 6:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 draw bar

Posted By: rrhead(SD)
Subject: 6080 draw bar
Date Posted: 21 Apr 2012 at 1:02pm

I need a different draw bar for the 6080 I bought a year ago. I need the thicker one that was on the later ones. Part number is 72094177 and is 1.687" thick. We hauled manure with it this year and some of the loads made the thin one bend pretty far. Any help would be a appreciated. Thanks, rrhead(SD)

Replies:

Posted By: victoryallis
Date Posted: 21 Apr 2012 at 8:41pm

Get a salvage one - I got my latest from Heitman tractor. Bought an aftermarket one from Wortington 5 -6 years ago and didn't take long to bend it bad. Unless you change stuff around under the tractor you can't just switch to the thicker one.

Posted By: soybreedingboy77
Date Posted: 22 Apr 2012 at 8:32am

I got one for mine from our AGCO dealer but they sourced it from A&I. 200 to 250 if I remember correctly.

Posted By: rrhead(SD)
Date Posted: 22 Apr 2012 at 8:55am

Thanks for the replies. I will have to get the 6080's side by side and compare. Did not check under tractor. Looked like it would fit through the back holder. rrhead(SD)