Farm Equipment - torque specs for wc

Print Page | Close Window

torque specs for wc

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48828
Printed Date: 25 Aug 2025 at 3:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: torque specs for wc

Posted By: acwdwcman
Subject: torque specs for wc
Date Posted: 11 Apr 2012 at 1:46pm

Can someone give me the what the foot pounds of torque do I need to put on my 38 wc. I also need a picture of the pattern that I am supposed to tighten the nuts

in. Thanks for the help.

james

-------------
wd with a freeman model 90 trip loader, wd45, 38 unstylled wc, b 10 garden tractor and 2-14 ac trip plow. grandpa has a 56 wd45. wd. allis chalmers snap coupler blade and 3 bottom snap coupler plow

Replies:

Posted By: Gary
Date Posted: 11 Apr 2012 at 3:17pm

Front wheel or rear ?

Gary

Posted By: CTuckerNWIL
Date Posted: 11 Apr 2012 at 6:23pm

http://www.docstoc.com/docs/29611287/Tractor-Engine-Torque-Specs" rel="nofollow - http://www.docstoc.com/docs/29611287/Tractor-Engine-Torque-Specs
For head bolts, start in the middle of the head and go side to side and work your way out to the ends in a circle. Might do 1/3 torque, then 2/3 and then final. If there is a better description , somebody else chime in.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF