All-Crop Parts needed
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48791
Printed Date: 25 Aug 2025 at 7:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: All-Crop Parts needed
Posted By: TomYaz
Subject: All-Crop Parts needed
Date Posted: 10 Apr 2012 at 8:04pm
|
Hi All, Need part 513834. Its off a 66. its the long metal shield that rests on top of the sickle bar mount. Also, need 504196. Left side header divider bottom - 60/66. Thanks ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: Murph-NC
Date Posted: 10 Apr 2012 at 10:16pm
|
Tom, would the header divider bottom happen to be the same one I posted here? I don't believe it's the bottom, but I thought it was worth asking. http://allischalmers.com/forum/forum_posts.asp?TID=38995&PID=295995" rel="nofollow - http://allischalmers.com/forum/forum_posts.asp?TID=38995&PID=295995 . If not, I think we have another similar piece that may be what you need... don't have the parts book in front of me right now to confirm. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: SHAMELESS
Date Posted: 11 Apr 2012 at 2:42am
| what would you give me for a whole combine? |
Posted By: TomYaz
Date Posted: 11 Apr 2012 at 4:59am
Almost. Thats the bottom for the other side. Need the other one. ------------- If its not an All-Crop, it all crap! |
Murph-NC wrote:Posted By: TomYaz
Date Posted: 11 Apr 2012 at 5:00am
Undieing gratitude!
 ------------- If its not an All-Crop, it all crap! |
Posted By: Murph-NC
Date Posted: 11 Apr 2012 at 12:55pm
Is the bottom for the side you need about half the width of the one I show in the photos? If so, I think we may have it. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: TomYaz
Date Posted: 11 Apr 2012 at 3:58pm
Yep that sounds right. ------------- If its not an All-Crop, it all crap! |
Posted By: Murph-NC
Date Posted: 11 Apr 2012 at 7:08pm
Am I getting warmer?
  ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: TomYaz
Date Posted: 11 Apr 2012 at 7:37pm
Yeah that its BUT there shouldnt be that side piece on it. (first photo) The welded on piece on the bottom is not good. Keep that thought. Turns out I also now need some three prong guards.... two of them. ------------- If its not an All-Crop, it all crap! |
Posted By: Murph-NC
Date Posted: 11 Apr 2012 at 8:09pm
|
Tom, I assume you're meaning the smaller of the two parts I show. If so, the side piece is part of the same piece of sheet metal that makes the bottom and other smaller side. And the jury's still out on whether that piece is welded... it has a bolt at the front, and 50 years of dirt and grime at the rear... can't tell where/if it's welded. I'm not sure which All Crop these came from... they may be from Grandpa's oldest machine which seems to have some differences from the other 60 / 66's he had. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: Murph-NC
Date Posted: 13 Apr 2012 at 7:48pm
|
Tom, you've probably found what you need by now, but in case it matters, that bottom piece was not welded. In fact, it looks original... it has factory looking countersunk holes at both ends that match factory looking holes in the sheetmetal parts. Looks like a wear plate similar to what a sickle mower shoe would have. Maybe this didn't come off an All-Crop!?! Or maybe my Grandpa or someone else just did a nice job of fabricating this piece. ------------- '41 C w/Woods L503 mower, #3 mower, 2-way plows for C |
Posted By: TomYaz
Date Posted: 15 Apr 2012 at 8:01am
Perhaps it is OEM! Must be a very early 60. The other piece sure looks early. ------------- If its not an All-Crop, it all crap! |