Print Page | Close Window

FEC plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=48445
Printed Date: 29 Aug 2025 at 7:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: FEC plow
Posted By: TREVMAN
Subject: FEC plow
Date Posted: 03 Apr 2012 at 10:55pm
I found an allis 3 bottom plow with coulters. Its stamped "FEC" on the top of the frame. Has hex nuts. It has something that looks similiar to snap coupler but it looks like it slides on the arms and then attaches with threaded pins. The bottom member is not a ring at the  end, but a point that looks like a pin goes through horizontially. Can anyone give me more info on this plow, year of manufacture. I am assuming it is for a wd tractor, as it is "pre" snapcoupler? Any more info would be appreciated, Trev.



Replies:
Posted By: Pat the Plumber CIL
Date Posted: 03 Apr 2012 at 10:59pm
Pin Hitch, predecessor to the Snap coupler, WD and C I believe

-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails

1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net