D14 help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47935
Printed Date: 28 Aug 2025 at 9:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 help
Posted By: ironac
Subject: D14 help
Date Posted: 26 Mar 2012 at 12:55am
 i am overhauling my d14. when i was tearing down this fell out of the camshaft. problem is i dont know when end it came out of or what it is. can anyone help me out??? |
Replies:
Posted By: jaybmiller
Date Posted: 26 Mar 2012 at 6:03am
|
Well, I can't see anything in the parts book that looks like it ! What are the 'ballpark' dimensions...that might help ...
Jay
------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Chuck(ONT)
Date Posted: 26 Mar 2012 at 6:49am
|
Looks like it is from the oil pump.
------------- Never take life too seriously. Nobody gets out alive anyway! 1C 1 WD45 1 AC180 |
Posted By: Gary
Date Posted: 26 Mar 2012 at 8:14am
|
Looks like it might be the coupler from the end of the Oil Pump Shaft. The Open Ended Slots slip over a pin in the rear of the Camshaft. DickL will know for sure. Gary
|