Plowen with the 220
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47724
Printed Date: 23 Aug 2025 at 9:39pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Plowen with the 220
Posted By: Butch(OH)
Subject: Plowen with the 220
Date Posted: 22 Mar 2012 at 4:41pm
You guys posting all those plowing pics was giving me the itch so i got the 220 out this afternoon and 6 botttom 9000 plow and turned some dirt. Sorry for the shaky video, ever tried to plow and be camera man?
In cruise control on the 220, pulling 6 bottoms in fifth gear. Need a couple more to load the motor a little. Watch at the end of the field. Know what happened? reached over for the throttle to slow down and no throttle lever there! Been 35 years since I plowed with a 190XT but that's where my hand went to slow down at the end of the field, had to make a wide open turn, LOL.
[TUBE]http://youtu.be/g5BY6RZuVRc[/TUBE]
|
Replies:
Posted By: XT in pa
Date Posted: 22 Mar 2012 at 5:40pm
wow looks and sounds great . i wish i could have the enjoyment of running a 220 or 210 someday thanks again
------------- 190XT,D17and 7045
|
Posted By: Chris/CT
Date Posted: 22 Mar 2012 at 5:51pm
Sounds mighty fine! Love the growl out that engine, old earth making AC work.
|
Posted By: Rfdeere
Date Posted: 22 Mar 2012 at 6:19pm
Just tie a 4 bottom to the back Butch ! Ya might have to drop to fourth thou ! 
------------- Randy Freshour,Member Indiana AC Partners, http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com
|
Posted By: wheatbreeder
Date Posted: 22 Mar 2012 at 6:25pm
Butch, nice job of plowing your soil is light loam the way it is turning over and crumbling. Morley
------------- Farm stuff 8050,6690,175,F2,5050,WD
|
Posted By: redline
Date Posted: 22 Mar 2012 at 6:25pm
Thumbs up! Love the music of the chrome pipe.
Where are the rocks? You can't farm without rocks.
------------- If it weren't for the last minute, I wouldn't get anything done!
|
Posted By: Don(MI)
Date Posted: 22 Mar 2012 at 6:30pm
NICE!!!
I got a laptop with the minimum setup on it, wish I could see the video but sounds like fun!
------------- Galatians 5:22-24
"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"
|
Posted By: Bob D. (La)
Date Posted: 22 Mar 2012 at 6:40pm
Now you did it Butch. When them boys get home, they're gonna put a whoopin on you for not waiting on them. LOL Sure lookks like you were having a lot of fun though. Thanks for posting.
------------- When you find yourself in a hole,PUT DOWN THE SHOVEL!!!
|
Posted By: Calvin Schmidt
Date Posted: 22 Mar 2012 at 8:20pm
Good work Butch. Are you driving in the furrow now?
------------- Nothing is impossible if it is properly financed
|
Posted By: Butch(OH)
Date Posted: 22 Mar 2012 at 8:30pm
If I put the hitch in the ideal spot it puts the right tires on land but right beside the furrow. One little steering slip and you down in it fighting your way back out. I tired of that after just a round or two and set the hitch over to run in the furrow. If I was to add one more bottom it should move everything over far enough that I can run on land and some room for steering error,LOL Probably wont happen as moldboard plowing is strictly recreational type tillage here.
|
Posted By: cornbinder
Date Posted: 22 Mar 2012 at 8:52pm
i wish it was dry enought here to turn some soil. it rained alike craxy a few days ago, and soil is way to wet yet, even with these few sunny warm days.
------------- D-19 gas w/f-sold 185-d yr round cab 95 mustang gt 5.0 86 mustang 5.0 coupe 3 99 f-250 7.3 4x4's 96 f-250 7.3 4x4
|
Posted By: Luke R.
Date Posted: 22 Mar 2012 at 8:53pm
Cool video Butch. Wish i was there to see it.
------------- 4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F
|
Posted By: CTuckerNWIL
Date Posted: 22 Mar 2012 at 9:04pm
Nice rig Butch. I never liked them wide open turns I jumped the fence several years ago when a neighbor was rippin with a CAT Challenger. I rode a round with him and he jumps up outa the seat and tells me to take it. The first turn around I idled back a little and he says,"don't need to do that, just waists time" I made the next couple rounds at full throtle but never felt comfortable. I think I'd end up getting the headlands all uneven from not being consistent, but I guess I might have adapted in awhile???
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: Eldon (WA)
Date Posted: 22 Mar 2012 at 9:43pm
We never idled back with the WD45 diesels when I was a kid....kept em wide open till it was time to eat....let em idle whilst we was eaten, then wide open agin.
------------- ALLIS EXPRESS! This year:
|
Posted By: Butch(OH)
Date Posted: 23 Mar 2012 at 5:53am
Posted By: cornbinder
Date Posted: 23 Mar 2012 at 6:08am
we had d-17d's on the farm when i was a kid, dad and i was just talkin the other day reminscing about how we never shut those diesels down ,run em all day long! i guess i'm a wuss i throttle back when comin to the end of the field.
------------- D-19 gas w/f-sold 185-d yr round cab 95 mustang gt 5.0 86 mustang 5.0 coupe 3 99 f-250 7.3 4x4's 96 f-250 7.3 4x4
|
Posted By: Ken(MI)
Date Posted: 23 Mar 2012 at 6:40am
Nice video Butch, and an even better job of plowing, I love the sound of those big horses. Makes me wish I had something more to do with the 185 other than dragging the tree planter.
|
Posted By: BobHnwO
Date Posted: 23 Mar 2012 at 8:25am
I always run full throttle on the turns with my 7060,guess you younguns ain't coordinated enough,lol!
------------- Why do today what you can put off til tomorrow.
|
Posted By: dpower
Date Posted: 23 Mar 2012 at 8:36am
Posted By: Brian F(IL)
Date Posted: 23 Mar 2012 at 9:46am
Thanks for sharing, Butch. Pretty straight furrows too. Must be just like riding a bike...
|
|