Farm Equipment - WF/WC sleeve height

Print Page | Close Window

WF/WC sleeve height

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45576
Printed Date: 11 Sep 2025 at 1:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WF/WC sleeve height

Posted By: BLee Mn
Subject: WF/WC sleeve height
Date Posted: 14 Feb 2012 at 5:38pm

Took the Head off today and was wondering what i need for sleeve height or protrusion above Block, I used a staight edge and feeler guage, i would say i only have 1-2 thousands. Is this enough?

-------------
Cowboy UP

Replies:

Posted By: DrAllis
Date Posted: 14 Feb 2012 at 6:30pm

Run it. ...re-torque the head after a while when COLD and run the tappets again.

Posted By: BLee Mn
Date Posted: 14 Feb 2012 at 9:01pm

thanx DR. sure nice to have access to Experts on this forum.

-------------
Cowboy UP