Farm Equipment - WC right parts wrong configuation drawbar

Print Page | Close Window

WC right parts wrong configuation drawbar

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45492
Printed Date: 11 Sep 2025 at 2:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WC right parts wrong configuation drawbar

Posted By: Redwood
Subject: WC right parts wrong configuation drawbar
Date Posted: 13 Feb 2012 at 11:12am

Does anyone have a clear photo of the swaying drawbar on a late 40's WC cast iron.

Due to the damage done to the threads in the housing, during use, the tractor was taken to the local blacksmith for repair (Early 60's). the platform is welded on now, which is fine. It looks right, just can't be taken off. They reconfigured the parts to a fixed drawbar configuration. From the schematic it look like I have all the parts... however the front mount assembly has been bolted on 90 degrees to what it should be.

I might be missing one piece, or picturing this wrong. The schematic does not show it quite in a way I can be sure.

Does anyone have a clear picture of the drawbar assembly either on or off the tractor?