Farm Equipment - cage bearing

Print Page | Close Window

cage bearing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45109
Printed Date: 12 May 2025 at 1:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: cage bearing

Posted By: Marlyn nwia
Subject: cage bearing
Date Posted: 06 Feb 2012 at 8:03pm

Is there anyone willing to tell me where I can purchase a cage needle bearing? I have an old IH running gear with 2 six inch roller bearings in each wheel. It seems difficult to come up with a 2" id. X 2 1/2 " od. and 6'' wide. Thanks Marlyn

Replies:

Posted By: steve(ill)
Date Posted: 06 Feb 2012 at 8:10pm

That seems abnormal. I would think a 2 inch wide bearing on each end, with a 2 inch long pipe spacer between them would be adequate. I would think needles 6 inches long would cock in the cage and bind ?

-------------
Like them all, but love the "B"s.

Posted By: j.w.freck
Date Posted: 06 Feb 2012 at 8:12pm

ck with bearing supply...

Posted By: steve(ill)
Date Posted: 06 Feb 2012 at 8:12pm

I dont know where you normally get bearings, but Motion Industries or Berry Bearing are two big warehouses. Motion is in Quincy ILlinois and BB is outside of St Louis i believe. Can find both in the yellow pages.

-------------
Like them all, but love the "B"s.