Whats it fit
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44337
Printed Date: 10 Sep 2025 at 8:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Whats it fit
Posted By: Matt (Jordan,MN)
Subject: Whats it fit
Date Posted: 23 Jan 2012 at 1:26pm
I got these piston and sleeve kits off a dealer auction last spring. I can't find what they fit. I do know that they are for a 2800 or 2900 engine but i don't know what fuel. They have a 3 7/8 bore and the outside of the sleeve is the same as one i have for a 190. The part numbers on the sleeve, wrist pin, and rings all come up as for a 180,190. The part im haveing trouble with is the number on the piston and box. The number on the piston is 71365372 and the number on the box is 7136551. I showed them to a old AC mechanic and he said they went to a 190xt gas. I would like to make sure that this is what there for before i try and sell them. Thanks Matt
 |
Replies:
Posted By: David(Stockbridge)MI
Date Posted: 23 Jan 2012 at 4:18pm
|
AGCO's site knows 372 is a piston and 551 a sleave but search eng will not search data base unless you pick a tractor model. checked 170.175,185,190,200,210,220,D19 and could not find a match. David http://www.djstractorparts.com" rel="nofollow - www.djstractorparts.com ------------- All "NEW" Web Site http://www.djstractorparts.com 2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler |
Posted By: 190xt
Date Posted: 23 Jan 2012 at 4:37pm
| Hey Matt do you have any parts for allis 720 garden tractor thanks 190xt if you do could you call. my number is 763 607 1807 thanks |
Posted By: injpumpEd
Date Posted: 23 Jan 2012 at 7:58pm
|
looks like a gas piston to me. but gasoline or LP? ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: DrAllis
Date Posted: 23 Jan 2012 at 9:51pm
| Definately 301 gas or LPG if the bore is 3 7/8" |
Posted By: Travis(NE)
Date Posted: 23 Jan 2012 at 9:57pm
| I can't match them to anything? Are there #'s on the rings, o-rings, or the little yellow bag? |
Posted By: TramwayGuy
Date Posted: 23 Jan 2012 at 9:59pm
| Makes sense that the number on the box would be different than the piston. The box has more than just a piston in it. |