hardware to mount dual's ( wd)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44194
Printed Date: 11 Sep 2025 at 12:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: hardware to mount dual's ( wd)
Posted By: Bob wi
Subject: hardware to mount dual's ( wd)
Date Posted: 21 Jan 2012 at 10:19am
| wanting to put duall's on the wd just because I got extra wd rim and tire's anybody got picture's or idea's |
Replies:
Posted By: Farrell(Utah)
Date Posted: 21 Jan 2012 at 10:59am
|
I have seen the regular wheels used as duals. One wheel is spun in against the tractor and the other dual is spun out. Then two lug bolt holes are enlarged so two lug bolts will fit over them. Then all but two bolts are removed from the inside dual and then the outside dual is put in place and the six lug bolts are put in place through both wheel centers. ------------- A(1937), 2 G, 2 WD45 diesels, 6 WD45 gas, UC, 2 WD, D17 gas, WF, Farmall 400, D12, Kubota B3030 |
Posted By: Eldon (WA)
Date Posted: 21 Jan 2012 at 12:06pm
|
Usually the wheel center fits on the hub pilot tight enough you should be able to mount it with a couple of bolts, then remove them before installing the other wheel. Another way would be to take a couple of long lugbolts and cut the heads off of them, (grind a couple of flats on them to get a wrench or socket on) and use them as pilots to help line the holes up when putting on the second wheel. Remove and replace with regular bolts when the other 6 are in. With no pilot diameter for the second wheel, I'd want all 8 bolts holding it on if it is a working tractor. ------------- ALLIS EXPRESS! This year: |
Posted By: ChuckLuedtkeSEWI
Date Posted: 21 Jan 2012 at 12:44pm
|
Bob, if you have need some wheel centers and eccentrics, let me know. I know I have a set of them here. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: XT in pa
Date Posted: 21 Jan 2012 at 2:22pm
i put them on my 17 for planting corn i have hubs that bolt on the 4 bolt pattern like where you bolt the weights and they have an 8 bolt center ------------- 190XT,D17and 7045 |