Farm Equipment - Overhaul Kits?

Print Page | Close Window

Overhaul Kits?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=43664
Printed Date: 11 Sep 2025 at 2:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Overhaul Kits?

Posted By: sparky
Subject: Overhaul Kits?
Date Posted: 12 Jan 2012 at 8:02pm

Who offers the best and most complete engine overhaul kit on the market today for the WD-45? Also, is there a oilpump overhaul kit or someone who rebuilds oilpmps? Thanks Much!

-------------
It's the color tractor my grandpa had!

Replies:

Posted By: JimD
Date Posted: 12 Jan 2012 at 8:45pm

Depends on who you ask :)

I have installed a number of our kits and been very happy with them.

Clevite bearings, Victor Reinz gaskets, Hastings Rings, and Richland pistons and sleeves. All very quality parts and very good price.

As for the oil pump, I haven't seen a kit. Rarely have a seen an oil pump that needed rebuilt, the problem is almost always somewhere else in the system

If you would like to call our toll free number, I will be in most of tomorrow and can talk you through the process and our parts.

Jim Danforth

877-378-6543

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Posted By: sparky
Date Posted: 18 Jan 2012 at 9:20pm

Do any of the overhaul kit's come with rods also?

-------------
It's the color tractor my grandpa had!

Posted By: JimD
Date Posted: 18 Jan 2012 at 9:23pm

Nope, but I should have some salvage if you need them.

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Posted By: HagerAC
Date Posted: 18 Jan 2012 at 9:57pm

I just orded an overhaul kit for a WD-45 with oversize pistons from Tom's Engines. I am also ordering an Oil Pump rebuild kit as this tractor had 4 spun rod bearings so I want to make sure the pump is good. Kit costs around $250 and includes nearly everything that can be replaced in the pump. Gear lash in the pumps should be no more than 15 thousdandths.

-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52

Posted By: Bill_MN
Date Posted: 18 Jan 2012 at 10:30pm

where does one get an oil pump kit? I'd like to have that reference for my future WD rebuild

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow

Posted By: 79fordblake
Date Posted: 19 Jan 2012 at 12:09am

While your at it might as well order the D17 piston/sleeve kit so you will have about 50HP. That will be the route I'm going in the future.

Posted By: Glockhead SWMI
Date Posted: 19 Jan 2012 at 6:08am

I wonder if the aftermarket offer different kits for the 46,d17, 170.... I bet all 226 engines use basicly the same kit.

Posted By: Bob D. (La)
Date Posted: 19 Jan 2012 at 6:08am

I'm sure any of the providers offer quality kits. That said, I purchased a kit for my WD45 Hi Crop from Jim D. and was extremely pleased. Everything was quality and no problems whatsoever with the rebuild. PS: This was the first rebuild I ever attempted by myself. I could remember being gofor/ part cleaner for my Dad back on the farm in early 60's but didn't really get a lot of experience. Thank God for Allis manuals.

-------------
When you find yourself in a hole,PUT DOWN THE SHOVEL!!!