Farm Equipment - Clutch Adj 175 Crophustler

Print Page | Close Window

Clutch Adj 175 Crophustler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41713
Printed Date: 29 Aug 2025 at 3:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Clutch Adj 175 Crophustler

Posted By: Joe/NC
Subject: Clutch Adj 175 Crophustler
Date Posted: 06 Dec 2011 at 11:34am

The clutch pedal goes to the bottom, any adjustment or is it clutch time? I don't know if it slips or difficult to get in gear, friend has it in shop to repair.

Replies:

Posted By: Joe/NC
Date Posted: 06 Dec 2011 at 6:07pm

Bump

Posted By: DrAllis
Date Posted: 06 Dec 2011 at 8:28pm

Throwout brg sleeve may have rotated due to loose hardware on the fork. ...probably takes a split to fix this. Throwout brg failure and ate it's way thru the fingers....split to fix. The clutch pedal rod may have pushed thru the trunnion....a fine threaded nut on the rod will fix this easily...no splt. If it has 3000 or more hrs on it it might need a clutch anyway.

Posted By: Bret (OH)
Date Posted: 07 Dec 2011 at 6:56am

Had a Series IV couple of years ago with a low clutch pedal, didn't happen all at once but after a couple of days using the tractor the pedal became so low that couldn't get i in gear anymore. Split the tractor and found the Clutch Lever had cracked. When clutch pedal was depressed it wasn't moving the release bearing collar far enough to disengage the clutch. Clutch Lever AGCO Part # 70242463 was still available from AGCO. It takes a Qty. of 2 parts that get bolted together.

Heres a link to the AGCO parts book, scroll down to page 186 Drive Train, Controls, Clutch Pedal

http://www.agcopartsbooks.com/PartsBooksN/Viewer/book.aspx?book=agco/79001558 - http://www.agcopartsbooks.com/PartsBooksN/Viewer/book.aspx?book=agco/79001558