Farm Equipment - Will an AC 200

Print Page | Close Window

Will an AC 200

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41512
Printed Date: 28 Aug 2025 at 2:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Will an AC 200

Posted By: captaindana
Subject: Will an AC 200
Date Posted: 03 Dec 2011 at 10:47am

rear end [from torque tube on back] work on a 190XT III?

Replies:

Posted By: SteveM C/IL
Date Posted: 03 Dec 2011 at 1:11pm

Don't like the sound of that question.New 190 got problems?

Posted By: captaindana
Date Posted: 03 Dec 2011 at 5:54pm

Nah Steve I was just thinking out loud. I was talkin with someone who had said 200 rears were heavier than 190's, and for the folks with the earlier XT's that have tranny issues I wondered if it could solve their problems if a bad engine 200 could be bought cheaply and bolted onto an XT.

Posted By: DrAllis
Date Posted: 03 Dec 2011 at 7:15pm

Yes, a 200 rearend could be made fit with very minimal changes. The transmission is essentially the same between a 190XT and a 200......nothing different enough to warrant swapping just to get a newer rearend.

Posted By: injpumpEd
Date Posted: 04 Dec 2011 at 10:02am

biggest significance is the better brakes from a 200.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: DrAllis
Date Posted: 04 Dec 2011 at 10:03am

On 200's prior to sn 4001, they had the same band/disc brakes as the late 190XT III's.

Posted By: DougG
Date Posted: 04 Dec 2011 at 11:46am

I dunno bout the brake thing , had them completely redone on a 200 once - the first year was good - then every time you,d use the dam thing one would hang or something would happen to it