Farm Equipment - 190xt pictures

Print Page | Close Window

190xt pictures

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41450
Printed Date: 29 Aug 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt pictures

Posted By: Doyle B(NY)
Subject: 190xt pictures
Date Posted: 02 Dec 2011 at 5:52am

Replies:

Posted By: DrAllis
Date Posted: 02 Dec 2011 at 6:07am

Looks to me like it may have the interchangeable front steering support??? is there a hydraulic cylinder inside the front axle wishbone frame??

Posted By: Doyle B(NY)
Date Posted: 02 Dec 2011 at 4:25pm

We recieved it with the front wish bone bent and the cylinder gone however it steers great.

Posted By: dhs
Date Posted: 02 Dec 2011 at 5:12pm

How can it steer without the hydraulic cylinder? Did you put another cylinder on it?

Posted By: Doyle B(NY)
Date Posted: 02 Dec 2011 at 5:28pm

honestly i have no idea it must be like my d 17 be cause that also does not have a cylinder.

Posted By: Orange Blood
Date Posted: 02 Dec 2011 at 6:01pm

I do not know if all 190s were like our, but we can take teh front end off, and put on a tricycle front pedistal, we have done this before to hill tall corn.

-------------
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7

Posted By: DSeries4
Date Posted: 02 Dec 2011 at 9:34pm

Doyle, the steering system on a 190 is completely different from a D17. D17 is mechanical steering with power assist. The 190 is fully hydrostatic - no mechanical linkage. Needs a cylinder for it to steer.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: Doyle B(NY)
Date Posted: 03 Dec 2011 at 7:43am

Ours must have been changed around then because it has no cylinder and still steers fine.

Posted By: DrAllis
Date Posted: 03 Dec 2011 at 8:10am

The early 190's and 190XT's were available with an OPTIONAL interchangeable front steering support underneath the radiator. This steering support had internal hydraulic cylinders that did the hydrostatic steering very similar to a D17 so you could have a narrow front or a wide front axle. This was an OPTION and you paid extra for it. It didn't last too many years and was dropped altogether because very few ever wanted a narrow front anyway.

Posted By: ILGLEANER
Date Posted: 04 Dec 2011 at 10:43am

Dr. Allis,

Do all of the interchangeable fronts have the cylinder in them? I have 2 68 190's and they both have the interchangable fronts for the block on them. Just wandering if they would have the cylinders in them.

-------------
Education doesn't make you smart, it makes you educated.

Posted By: mark vaughn
Date Posted: 07 Dec 2011 at 8:52pm

have you thought of parting the tractor out. i would be interested in a few parts. if so please call me at 870 897 0649 thanks mark

Posted By: Don Jr NY
Date Posted: 09 Dec 2011 at 6:01am

Is this tractor still for sale? Please let me know. Thanks. Don Jr.

Posted By: Don Jr NY
Date Posted: 09 Dec 2011 at 6:40am

Just read your reply from the other day. Inbox is usable again. Thanks.