shifter fork
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41281
Printed Date: 20 Jul 2025 at 2:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: shifter fork
Posted By: prospolaris
Subject: shifter fork
Date Posted: 28 Nov 2011 at 7:31pm
|
so i took the top of the trans on the 190xt today just to see what was going on ion there. the tractor pops outa 3rd gear as i know they all seem to. ass i look at the shifter forks the 3rd gear fork is worn down to a 16th of an inch they are very thin. i know people say weld them up but steiners has them for sale for like $75 as i take it apart the 1 spring with the ball bearing, the spring is broken. would these 2 thing have anything to do with popin outa gear?
|
Replies:
Posted By: Jeff Z. NY
Date Posted: 28 Nov 2011 at 7:48pm
Very much.
I would be glad to find out it's there and not the gears.
-------------
I Love Meatballs and Dumplings on Toast with Gravy and Rosemary and ??? {Open For Suggestions}
|
Posted By: DSeries4
Date Posted: 28 Nov 2011 at 9:28pm
Shift fork could only be part of the problem. Weak bearings on the input shaft can make the shaft move around - this chews up the gears and causes gear jumping. Just fixed mine.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: DrAllis
Date Posted: 28 Nov 2011 at 10:06pm
|
Which spring?? the front one or the rear one??? the front is for neutral only.
|
|