Print Page | Close Window

Cummins conversion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41221
Printed Date: 29 Aug 2025 at 6:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Cummins conversion
Posted By: CaidAC
Subject: Cummins conversion
Date Posted: 27 Nov 2011 at 8:47pm
Could you put a Cummins N-14 into an 8550. If so how big a job would it be. Know anybody who's done one that I could speak with.


Replies:
Posted By: jorstad brothers
Date Posted: 27 Nov 2011 at 11:31pm
there are a lot repowerd with big cams  ours has a big cam mailto:2@350hp - 2@350hp it was repowerd whe it was 2 years old. bellhousing flywhell and crossmember is about all that was changed

Posted By: DonDittmar
Date Posted: 28 Nov 2011 at 8:33am

N14 is pretty much an electronic Big Cam...all based on the 855 CID block



-------------
Experience is a fancy name for past mistakes. "Great moments are born from great opportunity"

1968 D15D,1962 D19D
Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net