D14 transmission dipstick
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=41178
Printed Date: 29 Aug 2025 at 2:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 transmission dipstick
Posted By: John Sealey
Subject: D14 transmission dipstick
Date Posted: 27 Nov 2011 at 5:50am
| Could someone take a picture and measure the transmission dipstick on their D14 for me. Mine just has a bung in it. The po had over filled it or the hydrualics are leaking inside not sure. I will probably have a hard time finding an original dipstick but with the measurment and picture I can fab one. Thanks John |
Replies:
Posted By: ChuckLuedtkeSEWI
Date Posted: 27 Nov 2011 at 10:36am
|
I can measure the one on my D15, don't know how much difference there is between the two but it will get you somewhere. The overall length of it is 9 3/8". That is from the bottom of the dipstick to the top of it where the bottom of the dipstick mates to the top of the hole in the transmission. The hatching for the fluid level goes up 1" on the dipstick. I will load up some pics I just took and post them as soon as I get them up. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: norm[ind]
Date Posted: 27 Nov 2011 at 10:36am
| should have an original at shop puter at home 1-800-254-3116 |
Posted By: ChuckLuedtkeSEWI
Date Posted: 27 Nov 2011 at 10:47am
Here are some pics of my D15 dipstick.
   If you need anything else, let me know. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: John Sealey
Date Posted: 27 Nov 2011 at 2:42pm
| Thanks Chuck that will help a lot. At least I'll know how much oil to put back in. Norm did you mean that you have one at your shop for sale? |
Posted By: Ray
Date Posted: 27 Nov 2011 at 3:18pm
|
I have 2 nice original dip sticks for sale. 785-353-2392 |
Posted By: Chalmersbob
Date Posted: 27 Nov 2011 at 9:23pm
|
I had a issue with my D15 oil level in the transmission the first time I used it, after mounting the loader. The hyrdaulic pump was low in oil but the transmission was too full. I removed some fluid from the trans and put it into the pump reisivour and haven't had a problem since and I used the loader for 6 hours and the plow for 3 hours. Bob |